Toshiba EM1-31071 owner manual Data Transmission, Vendor, Nutrition Free Format, Change, Date/Time

11. PROGRAMMING PROCEDURES

11.14 LON SYSTEM

Data Transmission

The following data are down-line-loaded.
Page 1: (0). All (PLU+ING+NUTRI)	Page 2: (0). SPEED KEY
(1). PLU	(1). LOGO
(2). ING.	(2). VENDOR
(3). NUTRITION	(3). FREE FORMAT
(4). U. PRICE	(9). CHANGE PAGE

(5). DATE/TIME

(7). LOCK SCALE (Check the LON cable)

(8). OPEN SCALE (Release the lock after checking the LON cable.)

(9). CHANGE PAGE

n

Select a DLL data using the NEXT PLU

and – keys.

ENTER

The error terminal ID# is displayed. Use

the NEXT PLU and

– keys.

Release the scale from the error.

CLEAR

p

Errorous terminal

# is displayed.

Release the scale from the error.

0:CANCEL

1:RETRY

2:CONTINUE

Select one of the above using the NEXT PLU and – keys.

LOCK SCALE method

NOTE: DLL is performed automatically in the following two ways. It is selectable by the Initial Settings #0-6 and #0-7.

(1)LOCK SCALE method

Step 1: “LOCK SCALE” is sent. (*1)

Step 2: Selected data is sent. (*2)

Step 3: “OPEN SCALE” is sent.

*1: If an error occurs during step 1, the error terminal ID# is indicated. Select

“cancel”, “retry” or “continue” to release the terminal from an error.

cancel:	Quits the operation after sending “OPEN SCALE”
retry:	Tries to send “LOCK SCALE” again.
continue:	Ignores the error terminal and starts DLL.

*2 If an error occurs during step 2, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.

(2)Background DLL

Step 1: Selected data is sent. (*3)

*3 If an error occurs, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.

11-23