3 | 4 | Press firmly. | 5 |
6
Apply weight evenly. Do not move after placement. Water tight seal may break.
9 | Thread, then |
| hand tighten |
water supply.
7
!Hand Tighten Only. Do Not Overtighten.
Tighten handles alternately
10 until tank contacts bowl.
HAND TIGHTEN ONLY!
TIP: Place 2 pieces of masking tape on floor (as shown) to help with alignment in step 6.
8
*For seat installation,
see instructions
included with seat.
!WARNING:
Overtightening of water supply line nuts could result in breakage and potential flooding. If the connection leaks after hand tightening, replace the supply line. Do not use any type of sealant on the water supply connection.
!Use of plumber’s putty, pipe dope, or any other type of sealant will void the warranty.
- 2 - |
|