List of Optional Components not Included

General Installation Information

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately. After inspection and during installation, protect the bath from construction damage. Before installation, and before enclosing with wallboard, tile, etc., the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling! Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system. Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others.

For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions”. Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

!WARNING: Do not lift whirlpool by the piping harness at any time.

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
• Tape Measure		• Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 4 Stringers
•	Screw Driver	•	Drop Cloth
•	Standard Woodworking Tools	•	Cement, Plaster, Grout

•Personal Safety Equipment

•Caulking Gun

LIST OF OPTIONAL COMPONENTS (NOT INCLUDED):

DESCRIPTION	MODEL #	OPTIONAL COMPONENTS (NOT INCLUDED)
		E-Z INSTALL HEATER	APRON KIT	TILE BEAD KIT
CORNER DUET WITH SEAT	51	EZHEAT-100	N/A	751755-100

CENTURION ' X "	71	EZHEAT-100	N/A	751755-100

CONTEMPO OVAL		EZHEAT-100	N/A	N/A

FREE SPIRIT ' X 54"	4	EZHEAT-100	N/A	751755-100

• For these components please see your Vendor.

SPECIFICATIONS:

SIDE VIEW

END VIEW

BDRAIN / OVERFLOW

TABLE 1: GENERAL SPECIFICATIONS FOR WHIRLPOOLS AND BATH TUBS

Description	Dimensions	Drain / Overflow	Height to	Cut Out Pier	Rough-In Recess	Tub Edge to
			Underside of Deck:			Centerline Overflow:
	L-W-H			G x F	E x D
			C			J

51	L 4-1/" (14mm)	A 1-/"	C 1"	See Pier	N/A	1-5/"
		(40 mm)
Corner	W 0-1/" (157mm)		(4 mm)
		B 4"		Cutout		(1mm)
	H 0-1/" (51mm)
		(10 mm)		Dimensions


71	L 7" (1mm)	A 15-1/"	C 0-1/4"	70-1/"	7-/1"	"
		(4 mm)		(171 mm)	(1 mm)
' x "	W " (14mm)		(514 mm)
		B 10"		x 4-1/"	x 4-1/"	(15mm)
	H 1-/4" (55mm)
		(54 mm)		(7 mm)	(7 mm)


	L 7" (1mm)	A 1-1/"	C "	See Pier		-1/4"
		(470 mm)		Cutout	N/A
Oval	W 4" (107mm)		(54 mm)			(10mm)
	H 5-1/" (4mm)	B 15-/4"		Dimensions
		(400 mm)

4	L 7" (1mm)	A 17"	C 1-/4"	70-1/"	7-/1"
		(4 mm)		(171 mm)	(1 mm)
' x 54"	W 54" (17mm)		(55 mm)			N/A
		B "		x 5"	x 5-1/"
	H -1/4" (51mm)
		(14 mm)		(14 mm)	(14 mm)

754407-100 Rev. B

2351, 2371, 2466, 2383 specifications

American Standard is renowned for its commitment to innovative plumbing solutions, especially in the realm of bathroom fixtures. Among their extensive range, models 2383, 2466, 2371, and 2351 stand out, each showcasing unique features and advanced technologies designed to enhance user experience while prioritizing water efficiency and durability.

The American Standard 2383 model is a one-piece toilet that combines elegance with practicality. It features a streamlined design making it easy to clean and maintain. Engineered with a powerful siphon jet flushing system, the 2383 ensures effective waste removal while using just 1.6 gallons per flush, making it both environmentally friendly and cost-efficient.

The 2466 model is a two-piece toilet that emphasizes comfort with its elongated bowl design. It incorporates the innovative EverClean surface, which prevents the growth of stain and odor-causing bacteria, promoting a cleaner, fresher bathroom environment. The Toilet also features an efficient flushing system that delivers a strong and reliable performance, while the soft-close seat adds an extra touch of comfort.

Model 2371 is known for its aesthetic appeal and exceptional functionality. This model features a sleek, compact design ideal for smaller bathrooms without sacrificing comfort. The 2371 employs a design that optimizes water flow for maximum efficiency, ensuring effective waste clearance while using minimal water. Its high-performance flapper reduces water wastage, making it an excellent choice for eco-conscious consumers.

Lastly, the American Standard 2351 model offers a perfect combination of innovation and style. Designed for performance, it features a unique PowerWash rim that cleans the bowl effectively with every flush, ensuring cleanliness. Furthermore, the 2351 is equipped with a WaterSense-certified flushing system, which uses 1.28 gallons per flush, maintaining efficiency without compromising performance.

Overall, American Standard's toilet models 2383, 2466, 2371, and 2351 embody the brand's dedication to creating aesthetically pleasing, efficient, and easy-to-maintain products. They utilize advanced technologies aimed at conserving water, while their designs ensure maximum comfort and usability. With these models, American Standard continues to set a high standard for bathroom fixtures in homes across America.