6.Error Displays
6. Error Displays
Error Display | Cause | Correction |
|
|
|
| Your feet were not positioned over | Make sure that you are standing on |
| the measurement platform correctly | |
| the electrodes. | |
| and try again. | |
|
|
The measurement position was not | Remain still and do not move during |
stable or your feet were not placed | measurement. |
correctly. |
|
|
| Slightly moisten the soles of your |
| Feet are too dry. | feet with a damp towel and try |
|
| again. |
|
|
|
|
| Check that the registered settings |
| The body fat percentage and BMI | for height, age and gender are |
| correct. | |
| values are outside the | |
| If this error still appears and the | |
| measurement range noted in the | |
| height, age, and gender settings | |
| specifications on page 23. | |
| are correct, measurements cannot | |
|
| |
|
| be taken. |
|
|
|
| Your feet were not positioned over | Make sure that you are standing on |
| the measurement platform correctly | |
| the electrodes. | |
| and try again. | |
|
| |
|
|
|
|
| Remove the batteries then reinsert |
|
| them after waiting for at least one |
|
| minute. |
| An operating error has occurred. | Push the power switch to turn the |
| unit on, and repeat the | |
|
| |
|
| measurement. |
|
| If this error still occurs, consult your |
|
| OMRON service representative. |
|
|
|
| You stepped onto the measurement | Wait until 0.0 kg is displayed before |
| platform before 0.0 kg was | stepping onto the measurement |
| displayed. | platform. |
|
|
|
| The unit was moved before 0.0 kg | Do not move the unit until 0.0 kg is |
| was displayed. | displayed. |
|
|
|
| Movement during measurement. | Do not move till measurement is |
| complete. | |
|
| |
|
|
|
| Your weight is over 150.0 kg. | This unit can only be used by |
| people weighing less than 150.0 kg. | |
|
|
EN
21