7.Troubleshooting
7. Troubleshooting
Problem | Cause | Correction | |
|
|
| |
| Are the batteries worn out? | Replace all four “AA” batteries | |
Nothing is displayed when the | with new ones. | ||
| |||
power switch is pushed. |
|
| |
Are the batteries correctly | Insert the batteries correctly. | ||
| aligned? | ||
|
| ||
|
|
| |
An error message (Err1 to Err) |
|
| |
is displayed and | Refer to “6. Error Displays” on page 21. | ||
measurements cannot be | |||
|
| ||
taken. |
|
| |
|
|
| |
The weight values vary widely | Is the unit placed on a carpet or | Place the unit on a hard, level | |
for each measurement. | other soft flooring? | floor. | |
Is the floor surface is uneven? | |||
|
| ||
|
|
| |
The battery low indicator | The battery power is low. | Replace all four “AA” batteries | |
appears. | with new ones. | ||
| |||
|
|
| |
The %Fat value displayed is | Refer to “Avoid Taking Measurements Under the Following | ||
Conditions” and “Cases When the Calculated Results May Differ | |||
abnormally high or low. | |||
from Actual Body Fat Percentages” on pages 16 to 17. | |||
| |||
|
| ||
Other conditions. | Remove the batteries, then reinsert them after waiting for at least | ||
one minute. |
| ||
|
| ||
|
|
| |
8. Maintenance and Storage
To protect your unit from damage, please observe the following:
•Do not wipe the unit with benzene, gasoline, paint thinner, alcohol, or other volatile solvents.
•Do not subject the unit to extreme temperatures, humidity, dust, moisture or direct sunlight.
•Do not subject the unit to strong shocks, vibrations (for example, dropping the unit on the floor), or uneven surfaces.
•Do not use the unit where it will be exposed to chemicals or corrosive vapors.
Caution!
•Always store the unit where unsupervised young children will not be able to access it.
•Do not disassemble the unit. You may be injured or damage the unit.
•Remove the batteries from this unit when you are not going to use it for a long period of time (approximately three months or more).
22