Omron BF400 Using the Unit, Taking a Measurement, Select Personal ID or Guest mode

Page 14

5.Using the Unit

5. Using the Unit

5.1Taking a Measurement

1.Push the power switch to turn on the unit.

“CAL” blinks on the display, then the display changes to 0.0 kg. Wait until 0.0 kg appears on the display.

2.Select Personal ID or Guest mode.

If you have a personal profile (Personal ID) registered on the unit:

1.Press the USER

button until the ID number for the personal ID containing your personal profile blinks on the display.

Notes:

•If an error occurred for the body fat percentage measurement during the previous measurement, “– – –”will be displayed for %FAT.

•If you want to check

the last

measurement results, press the

GUEST/MEMORY button while your personal profile blinks on the

display. The memory indicator is displayed. After you check the last measurement results (refer to p. 15), push the power switch to turn off the unit.

2.Press the SET button.

“CAL” blinks on the display, then the display changes to 0.0 kg.

Wait until 0.0 kg appears on the display.

If you do not have a personal profile registered on the unit (Guest mode):

1.Press the GUEST/MEMORY button.

The GUEST indicator appears on the display and the age setting blinks.

2.Enter the information for your age, gender and height. (Step 4 in “4. Setting and Adjusting Personal Data” on page 12)

Press the or buttons to adjust the settings for each category and then press the SET button to confirm each setting.

After you confirm the setting for height, the unit displays the settings for all three settings then 0.0 kg appears on the display.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Body Fat Monitor with Scale BF400Contents Measurement is fast and simple FeaturesEasy-to-Understand Display Calculated results are shown in an easy-to-see displaySave these instructions for future reference Cause of Fluctuations Examples of Fluctuation What You Should Know When Using This UnitWhat is Body Fat Percentage? Conditions Actions Advice for MeasurementRecommended times for measurement What is the DXA method? What is the Bioelectrical Impedance method?How to estimate the body fat percentage Principles of Body Fat Percentage MeasurementKnow Your Unit Main UnitDisplay Packaging ContentsDisplay Mode Indicator Weight Body Fat Percentage Four AA manganese batteriesInserting and Replacing the Batteries Put the battery cover back in placeBattery life and replacement Press the User button to select a personal ID Number Setting and Adjusting Personal DataPush the power switch to turn on the unit Press the SET button to confirm your selectionSet your age, gender, and height Repeat steps 1 to 2 in the procedure aboveChanging the Information for a Personal ID Number Adjust the information for your age, gender, and/or height Delete a Personal ID NumberTaking a Measurement Using the UnitSelect Personal ID or Guest mode Step onto the measurement platform Push the power switch to turn off the unit Avoid Taking Measurements Under the Following ConditionsUsing the Unit How to Obtain Reliable Results How to Interpret the Measured Results Body fat percentageMeasuring Weight Only Error Displays Error Display Cause CorrectionProblem Cause Correction TroubleshootingMaintenance and Storage Technical Data Omron Healthcare Europe B.V
Top Page Image Contents