User Profile, Guest Mode | Oregon Scientific GR101 guide

Press ▲ / ▼ to adjust the values of each setting. Press SET to confirm.

GUEST MODE

The Guest Mode is for users without a User Profile set up. You can measure your weight and BMI in this mode.

1.Press Guest/Weight. Once the

Reception icon blinks and the Scale’s LED Indicator is blank, the Remote Monitor is ready to receive

2.Follow Steps 3 and 4 of the USER

You can choose to skip the next set of instructions if you do not want to measure your Body Fat and Body Water levels.

3.Once the green LED stops blinking, the Remote Monitor will prompt you for:

a.Gender: Male / Female

b. Birth Month

c.Birth Year icon appears

d.Height:

•In centimetre (cm) if kg (kilogram) weight unit was selected.

•In feet and inches if lb (pound) or st-lb (stone) weight unit was selected.

Press ▲ / ▼ to adjust the values of each setting. Press SET to confirm.

4.When completed, your Body Fat and Body Water measurements will be alternately displayed on the Remote Monitor.

With this product, you can set and store the age, gender, and height for up to four people (User 1 to 4) who regularly use the Body Fat Monitor.

If the batteries are low, you cannot store the height and age to memory.

1.On the Remote Monitor, each user is represented by one of the four User Switches. Press 1, 2, 3, or 4 to select a user.

Make sure not to store your height and birth date over someone else’s existing profile.

2.Once the green LED stops blinking, the Remote Monitor will prompt you for:

a.Gender: Male / Female