User Profile Measurements

d.Height:

•In centimetre (cm) if kg (kilogram) weight unit was selected.

•In feet and inches if lb (pound) or st-lb (stone) weight unit was selected.

Press ▲ / ▼ to adjust the values of each setting. Press SET to confirm.

Once you set a User Profile, the GR101 can automatically calculate the body mass index (BMI), Body Fat Percentage, and Body Water measurements.

1.Press the User Switch (1 to 4) that has your User Profile configured.

2.Your profile will appear on-screen.

Once the Reception icon blinks and the Scale’s LED Indicator is blank, the Remote Monitor is ready to receive your weight information.

3.Step onto the Scale. Stand still while the measurement is being taken. The Scale’s green LCD Indicator will blink.

It is recommended that you step onto the scale with your bare feet. The electric signal sent from the scale cannot give readings if socks or shoes are worn.

4.Your weight and BMI will first appear on the Remote Monitor. Remain still, and the green LED Indicator will blink more rapidly to record your Body Fat and Body Water measurements.

If “OL” is shown on the Remote Monitor, the maximum loading capacity for the Scale has been exceeded. Step off the Scale and try again with less than 150kg of weight.

If you wait for too long before stepping on the Scale, your measurements will not be taken correctly. Step off the Scale and follow these instructions again.

5.Once the green LED stops blinking, your Body Fat and Body Water measurements will be alternately displayed on the Remote Monitor.

Weight, Body Fat and BMI Display: