GB
TAKING MEASUREMENTS
If you have entered a user setting, you can make use of the saved settings to automatically find out your weight, BMI, and Body Fat Index. For users who do not have settings stored, you can choose to take measurements as a “Guest User”.
NOTE It is necessary that you step onto the Monitor with your bare feet. The electric signal sent from the Monitor cannot give readings if socks or shoes are worn.
TAKING BODY FAT MEASUREMENTS WITH STORED USER SETTINGS
Diagram
Instruction
1.Press user setting switch 1, 2, 3, or 4 to select the user corresponding to your settings. The LCD will show your height, gender and age.
2.Wait until your settings disappear and the weight “0.0” is displayed.
3.Step on the Monitor. Stand still while the measurement is being taken. The Monitor will beep when the measurement is complete. The weight, BMI, and Body Fat Index will display.
NOTE If “ 
” is shown, the Monitor is unstable while measuring your weight. Make sure to remain still and place the Monitor on a flat surface. Use the carpet feet if the ground is uneven. Step off the Monitor and follow the instructions from the beginning.
NOTE If “ 
” is shown, you have stepped on the Monitor too early. Step off the Monitor and follow the instructions from the beginning.
NOTE If “ 
” is shown, the maximum loading capacity for the Monitor has been exceeded. Step off the Monitor and try again with less than 150kg of weight.
NOTE If you wait for too long before stepping on the Monitor, the LCD display will go blank. Step off the Monitor and follow the instructions again from the beginning.
11