Oregon Scientific GA 101 Getting Started, Unpacking the Body Weight Monitor, Diagram Instructions

GB

GETTING STARTED

UNPACKING THE BODY WEIGHT MONITOR

When you unpack your Body Weight Monitor, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. In the box, you will find:

The Monitor 4x AA 1.5-V Batteries User Manual 4x Carpet Feet

Selecting a Location for the Body Weight Monitor

Diagram Instructions

Place the body weight Monitor on a hard, even floor surface. Avoid thick carpeting or use the supplied carpet feet.

NOTE Placing the Monitor on the floor will display on the LCD. This indicates that it is calibrating. Simply leave the Monitor on the floor for 1-2 seconds to allow self-calibration.

Setting up the First Time

To set up your Body Weight Monitor:

Diagram

Instructions

1.Remove and discard the clear plastic tab inside the battery compartment.

2.Set the measurement unit:

2.1.Press and hold until “lb” flashes.

2.2.Press + or - to set unit in lb (pounds), st-lb (stones), or kg (kilograms).

2.3.Press to confirm the change.

NOTE If “lb” or “st-lb” is selected, the unit for your height is defaulted to feet and inches. If “kg” is selected, the unit for height is set to centimeters.

9