5.Enter age: The display “AGE” will appear on the left in the display and a figure for the age in the centre below the line.
Enter your age by pressing the keys “^” or “v” and press the key i to confirm.
6.Enter body size: The body size in centimetres will appear
in the display above the line. Enter your body size by pressing the keys “^” or “v” and press the key i to confirm.
Note: if you have selected the dimensional unit “lb” the body size will be shown in inches.
7.Following the setting of all personal data the storage place
just programmed will flash on the display. You can now switch off the remote control by pressing the key Uor
program additional storage places by pressing the keys “^” or “v”. If no keys are pressed, the remote control will switch itself off automatically after 60 seconds.
Simple weighing
(without simultaneous measurement of body fat and water contents)
Do not remove the remote control if you merely want to weigh yourself.
1.Gently touch the scale with your foot. The red LED display lights up. The running display “bALAnCE“ appears above the line, the display
and “0.0kg” appears below the line. The scale is now ready for operation.
2.Step onto the scale and remain still for weighing.
3.When the scale has established the approximate weight, “H” will be shown on the display. This display stops flashing as soon as the weight has been established exactly.
4.If you remain on the scale it will switch off after approximately 60 seconds. When you get off the scale, flashing “H“ is displayed 3 times and the display “0.0kg” returns. The scale is now ready again for weighing.
7