CHAPTER 2: USING YOUR INTEGRA™ 5 SCALE
Using the Weight Hold Feature (cont.)
To use the weight hold feature for one transaction:
1.With no weight on the scale, press the Scale Functions key.
2.Select Weight Hold from the list of features. Result: WH displays to the right of the weight field.
3.Place a mailpiece on the scale and wait two seconds to make sure the weight registers before removing it.
Result: The weight reading is retained for a brief period.
4.Select the class and any desired fees. (Any key press other than zero extends the weight hold time for that transaction.)
5.When finished with your selections, transfer postage to the meter in the usual way.
To exit manual weight hold, wait a few seconds until the hold feature times out or press Zero or, to cancel the entire transaction, press CE/C.
To enable automatic weight hold feature for every transaction:
1.Press the Setup key.
2.Select Auto Weigh Hold to turn the feature on.
3.Select Exit.
4.Select Save changes (or to exit without saving, select Cancel all changes).
Result: The scale reinitializes and returns to ready mode. No indication of the weight hold feature displays. Thereafter, whenever you place an item on the scale, its weight will be retained briefly when you remove it from the platter.
To disable weight hold, repeat the above steps, noting that selecting Auto Weigh Hold in Step 2 results in Off displaying next to the feature.
18