use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f.If operating the Scale in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3.Personal safety
a.Stay alert, watch what you are doing and use common sense when operating the Scale. Do not use the Scale while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating the
Scale may result in serious personal injury.
b.Use safety equipment. Always wear eye protection. Safety equipment such as
c.Prevent unintentional starting. Ensure the Power Switch (11) is in the
d.Do not overreach. Keep proper footing and balance at all times. This enables better control of the Scale in unexpected situations.
4.Scale use and care
a.Do not force the Scale. Use the correct Scale for your application. The correct
Scale will do the job better and safer at the rate for which it was designed.
b.Do not use the Scale if the Power Switch (11) does not turn it on and off. Any equipment that cannot be controlled with the Power
Switch is dangerous and must be repaired.
c.Disconnect the AC/DC Adapter Cord before making any adjustments, changing accessories, or storing the Scale. Such preventive safety measures reduce the risk of starting the equipment accidentally.
d.Store idle battery powered equipment out of the reach of children and do not allow persons unfamiliar with the Scale or these instructions to operate the equipment. Battery powered equipment are dangerous in the hands of untrained users.
e.Maintain the Scale. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the Scale’s operation. If damaged, have the Scale repaired before use. Many accidents are caused by poorly maintained battery operated power equipment.
f.Use the Scale in accordance with these instructions, taking into account the working conditions and the work to be performed. Use
of the Scale for operations different from those intended could result in a hazardous situation.
5.Battery tool use and care
a.Recharge only with the AC/DC Adapter (25) specified by the manufacturer. An Adapter that is suitable for one type of Battery may create a risk of fire when used with another Battery Pack.
b.Use this Scale only with specifically designated Batteries. Use of any other
Battery may create a risk of injury and fire.
c.When the Battery (21) is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the Battery Terminals together may cause burns or a fire.
d.Under abusive conditions, liquid may be ejected from the Battery (21). If contact with liquid from the battery accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the Battery may cause irritation or burns.
6.Service
a.Have your Scale serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained.
Specific Safety Warnings
1.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.This Scale contains a sealed lead Battery. Do not dispose of an old Battery in fire to avoid explosion and possible personal injury. Recycle old batteries according to local solid waste authority procedures.
3.Do not exceed the Scale’s maximum weight capacity of 33 pounds.
4.Avoid unintentional starting. Prepare to begin work before turning on the Scale.
5.Do not leave the Scale unattended when it’s AC/ DC Adapter is plugged into an electrical outlet. Turn off the equipment, and unplug the AC/DC Adapter from its electrical outlet before leaving.
6. | The AC/DC Adapter gets hot during |
| use. The Adapter’s heat can build up |
| to unsafe levels and create a fire |
| hazard if it does not receive adequate |
| ventilation, due to an electrical fault, |
| or if it is used in a hot environment. |
Do not place the Adapter on a flammable surface.
Especially avoid placing the Adapter on carpets and rugs; they are not only flammable, but they
SKU 98059 | For technical questions, please call | Page 3 |