Operating the Scale
Components and Controls
|
| FIGURE B | |||
TARE |
| KILOGRAMS | |||
|
|
|
|
| POUNDS |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
ZERO |
| AC POWER | |||
|
| PLATFORM (1) | |||
|
|
|
| ”UNIT” | |
|
|
|
|
|
|
| “ZERO” |
|
SCALE LEVEL |
| “TARE” |
|
| |
(26) |
|
|
WEIGHT WINDOW |
| |
Refer to the above photos for the following instructions. The function buttons (Tare, Unit and Zero) are on the right side of the front of the Scale. The indicator lights on either side of the Weight Window display information about the Scale’s settings.
Turning on the Scale
Turn the Power Switch (11) to its “ON” position. The Scale will do a
Reset Weight to Zero
1.The “ZERO” Indicator Light is located at the bottom/left of the Weight Window (See Figure B). Once the Scale is turned on, it will illuminate to indicate the Scale is at the ZERO position.
2.If the Weight Window does not display “0.000” before you weigh an object, and the zero range is less than 60g, press the “ZERO” key. Begin weighing when the Weight Window displays “0.000”.
Change Units of Measure
1.Press the “UNIT” button to switch between the measurement unit settings. The Kg (Kilogram) and LB (Pound) indicator lights are located to the right of the Weight Window, indicate which setting is current.
Set Container to Zero before Weighing
The Tare button is used to reset the scale to zero when an empty container is set on the scale, and the container is not included in the weight of the objects to be weighed.
1.The “TARE” Indicator Light is located at the top/left of the Weight Window (See Figure B). Once the Scale is turned on, it will illuminate to indicate the TARE weight is cleared.
2.To weigh objects in a container, but not include the container weight, place an empty container on the Platform (1) of the Scale. Press the “TARE” button and wait for the Weight Window to display “0.000”, indicating the Scale is ready for weighing. Place the objects into the container, and the Weight Window will display the weight of the objects.
Turning off the Scale
1.To turn off the Scale, simply turn the Power Switch (11) to its “OFF” position.
2.Always make sure to store the Scale in a clean, dry, safe location out of reach of children and other unauthorized persons.
Note: Disconnect charger. Do not store the
scale with anything on top of it.
SKU 98059 | For technical questions, please call | Page 7 |