Harbor Freight Tools 98059 manual Inspection, Maintenance, and Cleaning, Maintenance and Servicing

Page 8

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch of the Scale to its “OFF” position and unplug the unit’s AC/DC Adapter from its electrical outlet before performing any inspection, maintenance, or

cleaning procedures.

TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:

Do not use damaged equipment. If abnormal noise or erratic values are shown, have the problem corrected before further use.

Inspection, Maintenance, and Cleaning

1.BEFORE EACH USE, inspect the general condition of the Scale.

2.BATTERY REPLACEMENT: A Battery that fails to accept a charge is an indication the Battery should be replaced. To replace the Battery requires the use of a soldering tool and specific soldering expertise. It is recommended that only a qualified service technician perform a Battery replacement procedure. Note: Battery must be fully discharged prior to any soldering.

3.AFTER USE, clean all external surfaces of the Scale with a soft, clean cloth. Do not use solvents. Do not immerse the Scale in liquid.

4.WARNING! If the Cord of the AC/DC Adapter is damaged, it must be replaced only by a qualified service technician.

SKU 98059

For technical questions, please call 1-800-444-3353.

Page 8

Image 8
Contents Item 98059 33 LB. Weight Capacity Save this ManualGeneral Power Tool Safety Warnings SpecificationsImportant Safety Information Save This ManualSpecific Safety Warnings Double Insulated Tools Tools with Two Prong Plugs Extension CordsGrounding Outlets for 2-Prong PlugSymbology 25’ 50’ 75’ 100’ 150’120/240 Volt At full loadScale Set Up Charging the BatteryOperating Instructions To Prevent Serious Injury from Accidental OperationOperating the Scale To Prevent Serious Injury from Equipment Failure Inspection, Maintenance, and CleaningMaintenance and Servicing Troubleshooting Display Meaning Action to be TakenRecord Product’s Serial Number Here Parts List & Assembly DiagramDescription Qty Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800