Description of Display Symbols
Display:Icons:
Systolic Pressure
Diastolic Pressure
Pulse Rate
No. of Memory
Sequence
Appears when measurement value is stored in memory or is recalled from memory
Appears when batteries should be replaced
Shows the pulse rate per minute
Occurs when a mistake was made during measurement
Appears when manual cuff deflation is needed.
Appears when manual cuff inflation is needed.
Troubleshooting
If any abnormality occurs during use, please check and correct the following:
Condition | Correction |
Display is blank when power is on. | Check and correct the polarity of the |
| installed batteries. Reinstall or replace |
| batteries. |
Measurement incomplete or | Review and follow “Applying Your |
abnormally low or high values | Blood Pressure Cuff” and “Taking |
displayed. | Your Blood Pressure Reading” sections. |
| Replace the batteries. |
|
|
EE symbol displays. | Did you talk or move during the |
| measurement? Review “Applying Your |
| Blood Pressure Cuff” section. |
|
|
Measurements are different from | Remember, blood pressure readings |
those typically measured by | are influenced by physical and mental |
physician or every measurement | conditions and/or even the time of day. |
reading is different. | Daily measurements should be |
| interpreted by your physician. |
|
|
– 12 –