![](/images/new-backgrounds/1137920/13792049x1.webp)
APPENDIX
Q&A (continued)
Q The
indicator does not light when an arm is moved.
AThe indicator is a function to notify you that your arm is bent or to indicate extra loads on the cuff.
Therefore, it may not indicate motions (bending an arm slightly, etc.) that do not affect the cuff. If you are concerned about the result, retry the measurement.
Troubleshooting
English
Display | Status before error |
| The indication disappears in the |
| middle of the operation. (the |
is displayed. mark is displayed.) | |
| Your arm or body moved. |
|
|
| Pressurization to more than |
| 280 mmHg was performed. (Cuff |
| pressurizes several times.) |
is displayed. Pressure decreased suddenly.
Cuff does not inflate.
The measurement is not possible though the cuff inflates.
Cuff pressurizes several times.
Failure of the main unit is displayed.
Cause and solution
Batteries are exhausted. (See page 10.)
Has the unit detected movement? (See page 15.)
Were measurements taken
according to the proper procedure and in the correct posture? (See page 13.)
●● | Is the cuff | wrapped properly? |
●● Is the cuff | plug inserted correctly into | |
| the socket? |
(See page 12.)
Take it to the store where it was purchased for testing and repairs.
24