Installation

6486A/6487RA: RAISED TOILET SEAT WITH LOCKING CLAMP WITH SUPPORT ARMS 6487RA, 6487RA-1

ASSEMBLY & OPERATION INSTRUCTIONS

PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE

Note: The most current version of these instructions can be found online at www.grahamfield.com

WARNING: Important! Read and understand these instructions before installing or using the Raised Toilet Seat with Locking Clamp. If you do not understand any part of these warnings, cautions or instructions, contact a healthcare professional for direction in the use of this product. If the raised toilet seat is not properly assembled and installed, per- sonal injury and damage to the raised toilet seat could result.

WARNING: If components are damaged or missing, contact your dealer immediately. DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement parts could cause personal injury and damage to the raised toilet seat.

WARNING: This product has a weight limit of 300 lb.

WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury caused by improper assembly, installation or use of this product.

6486A	6487RA	flange	paddle	knob
6486A	6487RA

1.Remove toilet seat from carton and protective packaging.

2.If installing Model 6486A, proceed to step 3.

If installing Model 6487RA, follow steps a-e to install arms, then proceed to step 3.

a.Remove arms from box.

b.Insert each end of arm into the raised toilet seat as shown in center picture above.

c.Push arm downward until you hear it click into place.

d.Pull arm upward slightly to secure proper installation. If loose, repeat step c.

e.Repeat steps b-d for other arm.

3. Lift lid and seat of toilet. This raised toilet seat fits most current, standard toilets.

4.Place raised toilet seat on toilet bowl rim, hooking rear flanges under rear edge of bowl. Ensure paddle is back far enough to clear inner rim of bowl. If not, turn knob counterclockwise.

5. Ensure raised toilet seat rests flat on toilet bowl rim; straighten unit on bowl rim.

6.To tighten, rotate adjustment knob clockwise. Push unit back against rear of toilet rim while tightening knob. When you feel resistance, turn an additional 1/8 turn to snug. If top rear of unit hits the toilet seat or lid, you must remove the seat and lid for proper installation.

Note: The adjustment knob head must be flush with the front of the toilet seat for proper fit. On smaller bowls, if paddle is moved to rear of its travel, the knob may pop out of its origi- nal position; the knob will automatically re-engage when you re-tighten.

Note: Do not force the knob to turn. If necessary, jiggle the knob a little to start the threads.

GF0500058RevA09

6487RA, 6486A specifications

Lumex Systems has been at the forefront of innovation in the display and control industry, and its models 6486A and 6487RA are prime examples of this commitment to advanced technology. These state-of-the-art products offer a range of features that cater to various industrial and commercial applications.

The Lumex 6486A is a robust character LCD display, designed for versatility and reliability. This model features a 40-character by 2-line display, providing clear and concise information. The LCD is backlit, ensuring optimal visibility in various lighting conditions. It is equipped with a range of communication options, including RS-232 and USB interfaces, allowing for easy integration with multiple devices and systems. Additionally, this model boasts a wide operating temperature range, making it suitable for use in demanding environments.

On the other hand, the Lumex 6487RA takes functionality a step further with its advanced capabilities. This model integrates a graphical LCD display, offering a resolution of 128x64 pixels, which enables the representation of complex graphics along with text. This makes the 6487RA ideal for applications where visual feedback is crucial, whether it is in medical devices, industrial equipment, or consumer electronics. The system supports multiple communication protocols, ensuring seamless connectivity across various platforms.

Both the 6486A and 6487RA are designed with power efficiency in mind. They consume minimal power, which not only extends the lifespan of the devices but also reduces operational costs. The systems are equipped with built-in contrast adjustment features, allowing users to customize the display settings to suit their specific needs.

In terms of durability, Lumex products are known for their robust construction. Both the 6486A and 6487RA models are engineered to withstand harsh conditions, ensuring longevity and reliability. They utilize high-quality components that contribute to their excellent performance over time.

Furthermore, the user-friendly interface of both models facilitates ease of programming and operation, making them accessible even to those with limited technical expertise. With extensive documentation and technical support, users can maximize the capabilities of these displays.

In conclusion, Lumex Systems’ 6486A and 6487RA models exemplify superior technology and design, catering to diverse industrial needs. Their combination of versatility, robustness, and advanced features makes them a worthy investment for professionals seeking high-quality display solutions.