Auxiliary function
Buzzer Cancel Models Equiped
Your machine will send out an buzzer warning when the program comes to an end. If you do not want to hear this buzzing, you need to press the “Cancel Audio Warning” button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the program comes to an end.
Warning indicators
C Warning indicators may differ according to the model of your machine.
Filter cleaning
A warning LED will light up to remind filter cleaning after the program finishes.
C If the filter cleaning warning LED lights up continuously, please refer to, “Solution suggestions for problems”.
Starting the programme
1.Press “Start/Pause/Cancel” button to start the programme.
2.Light of the “Start/Pause/Cancel” button will turn on to indicate that the programme has started.
Progress of program
Progress of a running program is shown through the program
“Drying”:
-Drying level will be illuminated during the whole drying process until the drying
degree reaches “ Ready to Iron “.
“ Ready to Iron “:
-Starts to illuminate when the drying degree reaches “ Ready to Iron “ step and remains illuminated until the next step.
“ Ready to Wear “:
-Starts to illuminate when the drying degree reaches “ Ready to Iron “ step and remains illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes to an end and
CIf more than one LED light up or flash concurrently, it means there is malfunctioning or a failure (please see, Solution suggestions for problems).
Changing the program after the program has started
You can use this feature to dry your clothes under higher or lower temperatures after your dryer has started.
For example;
1.Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra
Dry” programme instead of “Iron Dry” programme.
2. Select the “Extra Dry” programme by rotating the programme selection button.
3. Press “Start/Pause/Cancel” button to start the programme.
C Press "Start/Pause/Cancel" button for 3 seconds to cancel the programme or turn the programme selection knob in any direction to end the programme while the machine is running. Water tank and filter cleaning warning lights turn on to warn the user when the programme is cancelled by pressing the "Start/Pause/Cancel" button for 3 seconds. However, the warning lights do not turn on when the programme is cancelled by turning the programme selection knob. Only the drying light turns on and the machine remains in hold until a new programme is selected and the "Start/Pause/Cancel" button is pressed.
Adding/removing laundry in standby mode
In order to add or remove laundry after the programme starts:
1. Press the “Start/Pause/Cancel” button to switch the dryer to “Pause” mode. Drying process will stop.
2. Open the door at “Pause” position and close it again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the programme.
C Any laundry added after the drying process has started may cause the dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.
C Laundry may be added or taken out as much as desired during a drying process, but this process will extend the programme duration and increase energy consumption since the drying will be interrupted continuously. Therefore, it is recommended to add laundry before the drying programme has started.
Child-proof lock
There is a childproof lock to prevent any program interruption due to the pressing of keys while the program is on. The loading door and all keys except the “On/Off” key on the panel are deactivated when the
In order to activate the childproof lock, press