Beko DV 6120 X manual Intended use, Children’s safety

Page 4

conditions.

Do not tamper with the controls.

Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual.

Inside and exhaust duct of the product must be cleaned by the qualified service personnel periodically.

Wrong connection of grounding conductor of the product can cause electric shock. If you have any suspect about the grounding connection, have it checked by a qualified electrician, service representative or service personnel.

Do not reach into the machine when the drum is spinning.

Unplug the machine when it is not in use.

Never wash down the appliance with water! There is the risk of electric shock! Always disconnect by unplugging from the mains before cleaning.

Never touch the plug with wet hands. Never unplug by pulling on the cable, always

pull out by grabbing the plug only. Do not operate the machine if the power cable or plug is damaged!

Never attempt to repair the machine yourself, otherwise, you will be putting your life and others’ lives in danger.

For malfunctions that cannot be solved by following the information given in the safety instructions:

Turn off the machine, disconnect the power cord and contact an Beko Service.

Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer immediately in order to lay them and dissipate the heat.

Remove the door of the drying compartment before decommissioning or disposing of the product.

The final step of the drying cycle (cool- down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them.

Fabric softeners or similar products should be used as specified by the fabric softener instructions.

Underwear that contains metal reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying.

Check all garments for forgotten lighters, coins, metal pieces, needles, etc. before loading.

Remove all objects from pockets such as lighters and matches.

At times when your dryer is not in use or after the laundry is taken out following the completion of drying process, turn off by using the On/Off button. In cases when the On/Off button is on (while the dryer is energized), keep the door of the dryer closed.

Intended use

This product has been designed for domestic use. It should not be used for other purposes.

Use the product only for drying laundry that are marked accordingly.

Dry only those articles in your product that are stated in this manual.

This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Children’s safety

Electrical appliances are dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.

Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.

Do not allow children sit/climb on or enter in the product.

Children should be supervised to ensure that they do not play with the product.

Close the loading door when you leave the area where the product is located.

4 EN

Image 4
Contents Dryer DV 6120 Explanation of symbols Read this manual prior to initial operation of the productImportant safety information Never operate your dryer without the lint filter installedChildren’s safety Intended useInstallation Appropriate installation locationUnder counter installation Mounting over a washing machineAdjusting feet Electrical connectionFirst use Disposing of packaging materialInitial preparations for drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineCorrect load capacity Preparing laundry for dryingLoading Selecting a Program and Operating Your Machine Filter cleaning warning light On/Off buttonControl panel Program selection Preparing the machine 1. Plug in your machineMain programs Program selection and consumption table Program tableAdding/removing laundry in standby mode Auxiliary functionProgress of program Changing the program after the program has startedEnding the program through canceling End of programFilter Cartridge / Door Inner Surface Maintenance and cleaningSensor models equipped with a sensor Solution suggestions for problems