19510317700 English, All Logos to be Ariston | {PDF Created 18/01/13 22:04:00} |
The Display TD4158FUH Issue 2
The Display has three main functions each with its corresponding button
Dryness Sensing Levels
After selecting a programme that has a Sensing Dry Option, press and release the button until the required dryness sensing level is displayed. If the sensing option is not available the display will flash and the buzzer beeps three times.
!Some sensing programmes do not have all five dryness level options Dryness levels available
Damp Dry: Dries your items ready to be ironed using a machine or rotary ironer.
Iron Dry: Dries you items ready to be ironed with a hand iron.
Hanger Dry: Dries you clothes ready to be hanged for final drying; Use this program if you do not need the items to be fully dry as it uses less Energy.
Cupboard Dry: Dries your items ready to be put away.
Extra Dry: Dries your clothes ready to be worn.
Timed Dry
After selecting a Programme that has a Timed Dry Option, press the Timed Button and the Timed Dry Icon will light, the display will reduce the selected time each time you press and release this button (see Start and Programmes). Each programme that has a timed option has different times available and the selection of up to11 drying times will also depends on the heat setting that you have selected
Each press of the button decreases the drying time.
If you change your mind, press the sensing button and sensing level options are available.
If the Timer Dry option is not available the timer icon will flash and the buzzer beeps three times.
The selected time remains displayed after the programme starts and can be changed during the programme if you wish.
Delay Timer
After selecting a Programme that has a Delay Timer Option a delay start time can be selected.
Each press of the Delay button 
advances the delay setting in 30 minutes increments from 
to
and then Increments from 
to 
then 
and then after five seconds cancels the delay. For delays of 10 hours or more the display counts down the time in hours until 10 hours, then the display
shows 
and then counts down in minutes. For delays 9 hours or less the display shows hours and minutes and then counts down in minutes for all of the delay.
After the Start/Pause Button 
is pressed the delay time can be changed or cancelled. When the delay period finishes the 
symbol is off and the Time to End is displayed
Time to End
If the delay icon 
is off the time displayed is the Time to End of the programme running.
When timed programmes are selected the time displayed throughout the cycle is the actual time remaining.
When an Automatic programme is selected the time displayed is an estimate of the time remaining. When the programme is selected the display shows the time required to dry a full load, after around 10 minutes the controller calculates a better estimate of the cycle time and this is updated during the programme.
The time to end is displayed in hours and minutes and counts down each minute.
The colons between the hours and minutes display flashes to show that the time is counting down. The Display also shows if there is a problem with your dryer, if this occurs the display will show F followed by a fault code number, the three option lights and the pause light will also flash Orange. (see Troubleshooting).
6