▼
To remove light dirt
4. Slide the cleaning shutter |
until it clicks. |
▼
For heavy dirt
4. | Turn the shaver off after |
| 10 - 20 seconds. |
5. | Remove the outer foil |
| section and turn the shaver |
| on. |
6. | Clean the shaver and the |
Replacing the system outer foil and the inner blades
system outer foil | once every year |
|
|
inner blades | once every two years |
Removing the outer foil section
Press the foil frame release button and lift the outer foil section upwards.
English
5. Clean the outer foil section |
with running water. |
outer foil section with |
running water. |
Attaching the outer foil section
After turning the water inlet surface to the front, securely attach the outer foil section to the shaver until it clicks.
2
1
6. Turn the shaver off. |
••Rinse with water and |
shake up and down |
several times to remove |
the water. |
▼
••Rinse with water and shake up and down several times to remove the water.
▼
►►Replacing the system outer foil
1. | Press the system outer foil release buttons |
| and pull down the system outer foil. |
2. | Align the water inlet surface and the system |
| outer foil mark ( ) and securely attach |
| together. |
| ••The system outer foil cannot be reversely |
| attached. |
| ••Always insert the system outer foil to the |
7. | Wipe off any drops of water with a dry | 8 |
| cloth. | |
|
| |
8. | Dry the outer foil section and the shaver |
|
| completely in a shaded area. |
|
9.Attach the outer foil section to the shaver.
••Open the cleaning shutter.
••The outer foil section will dry faster if removed from the main body.
foil frame when attaching to the shaver. |
►►Replacing the inner blades
1.Remove the inner blades one at a time.
••Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
2.Insert the inner blades one at a time until they click.
7