Installation, Installing the DIAL-ALERT AD-103

INSTALLATION

The Dial-Alertis installed using the screws provided. We have also included double sided tape, to use for temporary installation while you are positioning the dialer. Once the dialer is positioned correctly, install it permanently with screws. We have also included wall anchors and a template to help position the screws correctly.

How to use the template:

1.Cut the template in the correct position

2.Screw part way into the surface where the holes are marked

3.Unscrew the screws and remove the template

4.Screw the component in place where you started the screws

INSTALLING THE DIAL-ALERT (AD-103)

Position the dialer beside a telephone or near any phone line and within access of an electrical outlet. However, it is recommended that you hide the dialer for security purposes. The dialer runs on regular electrical current. It also contains a 9 volt backup battery in case power is interrupted for any reason. A phone line must be connected to the dialer in order for the dialer to work. Connect the phone lines and AC adapter as shown.

905-456-8883	12V DC

AC ADAPTER

								OPTIONAL LINE INPUT FOR
								OPTIONAL LINE INPUT FOR
PHONE								ANSWERINGMACHINE/TELEPHONE
								TEL LINE IN
LINE								TEL LINE IN
LINE

Note: The optional line input is intended for an answering machine, telephone etc. The device connected to the dialer will be disconnected when the dialer is activated. Therefore it will not affect the operation of the dialer.

There are 3 ways to attach the Dial-Alerton the wall:

1.Using double sided tape for temporary use.

2.Hanging it from the two keyholes on two stationary screws.

3.Screwing the back onto the wall with four screws.

To mount the Dial-Alert:

1.Open the case.

a) Press the two tabs on top of the

dialer.

b) Pull open the front.

–6–

ADVANCED PROGRAMMING

Changing Password

Password is required for programming purposes. Factory default is 0000. To change the setting, follow the instructions below.

1.Enter the current password (factory default password is 0000), then press [PROG], display will show [P] meaning you are now in programming mode.

2.Enter [2] to change password. Display now shows [nPIn], that means New PIN.

3.Enter the new 4-digit password.

4.Display now shows [rPIn] meaning re-enter the new pin. Enter the new 4-digit password again.

5.If the new password is accepted, it will emit 2 beeps. If you don’t hear 2 beeps, that means the password is not accepted, retry again.

Calling Time

The Calling Time is how long the phone will ring before it is disconnected. If the recipient does not pick up the phone after this time period, Dial Alert will disconnect and redial. The factory default calling time is 45 seconds. To change the setting follow the instructions below.

1.Enter the current password (factory default password is 0000), then press [PROG], display will show [P] meaning you are now in programming mode.

2. Enter [1] to change the calling time. Display now shows [P1 2], the most right digit represents the calling time setting. Refer to the table below for the calling time setting.

1 - 30 seconds

2 - 45 seconds

3 - 60 seconds

4 - 75 seconds

5 - 90 seconds

3.Enter the desired value based on the table below. For example, enter [5] to set the calling time to 90 seconds.

4.If the new setting is accepted, it will emit 2 beeps. If you don’t hear 2 beeps, that means the setting is not accepted, retry again.

–15–

ad-103 specifications

SkyLink AD-103 is an innovative advancement in satellite communication, designed to enhance connectivity in challenging environments. As a part of SkyLink's robust portfolio, the AD-103 stands out due to its unique features, cutting-edge technologies, and extensive capabilities.

One of the main features of the SkyLink AD-103 is its unparalleled signal strength and stability. Utilizing advanced modulation techniques, the AD-103 is capable of achieving high data rates while maintaining a reliable connection even in adverse weather conditions. This is particularly beneficial for industries such as maritime, aviation, and remote operations, where communication can often be compromised by environmental factors.

The SkyLink AD-103 employs the latest in phased array antenna technology. This enables electronic beam steering, allowing the antenna to adjust its signal direction without mechanical movement. This results in faster acquisition times and reduced latency, making it ideal for real-time applications. The high-frequency bands utilized by the AD-103 ensure efficient data transmission with minimal interference, further enhancing its performance.

In terms of connectivity, the AD-103 supports multi-user functionality, allowing several devices to connect simultaneously. This is made possible through its integrated network management system, which intelligently allocates bandwidth and manages traffic. Businesses can optimize their operations, ensuring all users receive adequate connectivity without experiencing bottlenecks.

Moreover, the SkyLink AD-103 is designed with ruggedness and durability in mind. Its compact, lightweight design makes it suitable for both permanent installations and portable use, enabling users to easily transport and deploy it in various locations. The device is built to withstand extreme temperatures and harsh environmental conditions, ensuring reliable performance in any scenario.

Another highlight is its compatibility with multiple protocols, making it a versatile choice for various applications. The AD-103 supports VoIP, video conferencing, and data transfer, catering to diverse communication needs. Integrated security features protect sensitive data, providing peace of mind for users handling confidential information.

In conclusion, the SkyLink AD-103 is a powerful satellite communication tool that combines advanced technology with user-friendly features. Its robust performance, flexibility, and durability make it an essential asset for industries requiring reliable communication in remote and challenging environments. As the demand for seamless connectivity continues to grow, the SkyLink AD-103 is poised to meet these challenges head-on, paving the way for enhanced global communication.