Lights and Sounds, Program a Phone Number

STANDARD PROGRAMMING

PROGRAM A PHONE NUMBER

You may program up to 9 different phone numbers. Follow the instructions below to program phone numbers.

1.Enter the current password (factory default password is 0000 ), then press [PROG], display will show [P] meaning you are now in programming mode.

2.Enter [4] which represents phone number programming. You will see [P4 PHonE 1]. The number on the most right represents the phone number, from Phone 1 to Phone 9.

3.Select the phone number you would like to program, from 1 - 9, then

press [ ].

4. Enter the phone number, then press [ ].

5. Display will show [rEdIAL 3], this is the default redial count. Press [ ] to accept, or enter a value from 1 - 9 to change the setting. Redial count is how many times this phone number will be retried if it is busy.

6. Display will show [rEPEAt 3], this is how many times the voice message will be played. Press [ ] to accept 3 times, or enter a value from 1 - 9 to change the setting.

Note:

Skylink recommends that the telephone or pager numbers of your relatives, neighbors, office/work, friends or doctor be programmed into your Dial-Alert.

Do not program the phone number to police or fire dept directly into your Dial-Alert unless you have checked with your local authorities. Please also inform all the recipients that their phone numbers have been programmed into your dialer, so they know exactly what happens when they receive your emergency message.

7.The Dial Alert is now in standby mode and the display shows “rEAdy” meaning you have recorded a voice message and have at least one phone number programmed. You may sometimes need to insert pause period in a phone number with numeric message (for pagers). Pager Pause is useful when you know you will be calling something like the pagers to send the numeric message where after the phone is picked

up. To program Pager Pause period between phone number and numeric message, press the [ ] button while you are programming a phone number. The Pager Pause duration is programmable. Please refer to advanced programming. Only one Pager Pause can be programmed within one telephone number.

–12–

LIGHTS AND SOUNDS

Below is an explanation of the lights and sounds of the Dial-Alert

LIGHTS

ACPWR light on	dialer is being powered by AC adapter.
ACPWR light off	dialer is not receiving any AC power.
LOBATT. light off	backup battery is connected and working.
LOBATT. light on	backup battery is weak, battery needs to be replaced.
ARM light flashes	the dialer is dialing out.
Keypad backlight	If unit is powered by AC adapter, back light stays
	on all the time.
	If unit is powered by battery only, back light stays
	on 10 seconds after a key is pressed.

SOUNDS

Short beep	You have pressed a key in the right order.
Two short beep's	1.) When the dialer is turned on for the first time.
	2.) When the pre-programmed transmitters/sensors
	are deleted from the memory.
Long beep	You have made a mistake.

AC. PWR LO BATT. ARM

LCD DISPLAY

PANIC BUTTON

PLAYBUTTON

ENTER

PROGRAM

BUTTON

SPEAKER

NUMERIC KEYPAD

–9–

ad-103 specifications

SkyLink AD-103 is an innovative advancement in satellite communication, designed to enhance connectivity in challenging environments. As a part of SkyLink's robust portfolio, the AD-103 stands out due to its unique features, cutting-edge technologies, and extensive capabilities.

One of the main features of the SkyLink AD-103 is its unparalleled signal strength and stability. Utilizing advanced modulation techniques, the AD-103 is capable of achieving high data rates while maintaining a reliable connection even in adverse weather conditions. This is particularly beneficial for industries such as maritime, aviation, and remote operations, where communication can often be compromised by environmental factors.

The SkyLink AD-103 employs the latest in phased array antenna technology. This enables electronic beam steering, allowing the antenna to adjust its signal direction without mechanical movement. This results in faster acquisition times and reduced latency, making it ideal for real-time applications. The high-frequency bands utilized by the AD-103 ensure efficient data transmission with minimal interference, further enhancing its performance.

In terms of connectivity, the AD-103 supports multi-user functionality, allowing several devices to connect simultaneously. This is made possible through its integrated network management system, which intelligently allocates bandwidth and manages traffic. Businesses can optimize their operations, ensuring all users receive adequate connectivity without experiencing bottlenecks.

Moreover, the SkyLink AD-103 is designed with ruggedness and durability in mind. Its compact, lightweight design makes it suitable for both permanent installations and portable use, enabling users to easily transport and deploy it in various locations. The device is built to withstand extreme temperatures and harsh environmental conditions, ensuring reliable performance in any scenario.

Another highlight is its compatibility with multiple protocols, making it a versatile choice for various applications. The AD-103 supports VoIP, video conferencing, and data transfer, catering to diverse communication needs. Integrated security features protect sensitive data, providing peace of mind for users handling confidential information.

In conclusion, the SkyLink AD-103 is a powerful satellite communication tool that combines advanced technology with user-friendly features. Its robust performance, flexibility, and durability make it an essential asset for industries requiring reliable communication in remote and challenging environments. As the demand for seamless connectivity continues to grow, the SkyLink AD-103 is poised to meet these challenges head-on, paving the way for enhanced global communication.