9. INSTALLING MULTIPLE TRANSMITTERS
ADDS MULTIPLE TRANSMITTERS
1PRESS TEST BUTTON
• CONSOLE ANNOUNCES TEST MODE
2 PRESS TEST BUTTON AGAIN
• CONSOLE ANNOUNCES ITS 
READY TO LEARN TRANSMITTERS
NOTE: EACH TIME THE TEST BUTTON IS PRESSED IN THE ADD TRANSMITTER MODE, THE CONSOLE WILL BE READY TO INSTALL A TRANSMITTER IN THE NEXT AVAILABLE SENSOR ZONE LOCATION.
THE CONSOLE WILL ANNOUNCE THE SENSOR ZONE LOCATION NUMBER.
3 ACTIVATE TRANSMITTER
• CONSOLE ANNOUNCES THE TRANSMITTER TYPE
NOTE: IF THE CONSOLE'S MEMORY
IS FULL, THE CONSOLE WILL ANNOUNCE "ERROR ZONES FULL"
4REPEAT STEPS 2 & 3 FOR ADDITIONAL TRANSMITTERS (UP TO 16 TOTAL)
5PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
NOTE: WRITE DOWN EACH TRANSMITTER'S TYPE AND ZONE NUMBER WHEN THE TRANSMITTER IS ADDED. THE CENTRAL STATION WILL NEED TO KNOW THE TYPE AND REPORTING ZONE FOR EACH TRANSMITTER
11. ERASING TRANSMITTERS
CAUTION: ALL TRANSMITTERS
WILL BE ERASED!
1PRESS AND HOLD THE TEST BUTTON FOR 5 SECONDS
•CONSOLE ANNOUNCES "ZONE RESET" (ALL TRANSMITTERS ERASED)
2PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
10. TESTING TRANSMITTERS
1PRESS TEST BUTTON
• CONSOLE ANNOUNCES TEST MODE
2 ACTIVATE EACH OF THE CONSOLE'S TRANSMITTERS, ONE AT A TIME 
3 THE CONSOLE WILL ANNOUNCE
THE TRANSMITTER'S TYPE
AND ZONE NUMBER AND ANY SUPERVISORY CONDITIONS
FOR THE TRANSMITTER
4PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
12. RECORDING REMINDER MESSAGES
RECORDING REMINDER MESSAGES 1. PRESS AND RELEASE THE TEST BUTTON
TO ENTER TEST MODE 2. PRESS AND HOLD THE HOME BUTTON FOR 5 SECONDS (BE READY TO RECORD) 3. RECORD UP TO A 15 SECOND MESSAGE
(SPEAK AT NORMAL VOLUME, TWO FEET FROM CONSOLE)
4.PRESS THE HOME BUTTON TO STOP RECORDING
5.PRESS THE HOME BUTTON AGAIN TO PLAY THE
MESSAGE JUST RECORDED, PRESS THE HOME BUTTON TWICE AND HOLD IT AFTER THE 2ND PRESS 
TO RECORD ANOTHER MESSAGE IN THE NEXT AVAILABLE MESSAGE NUMBER
6. REPEAT STEPS
7. PRESS AND RELEASE THE CANCEL BUTTON TO EXIT TEST MODE
TEST PLAYING REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON TO ENTER TEST MODE
2. PRESS AND RELEASE THE HOME BUTTON
3. THE CONSOLE WILL ANNOUNCE EACH MESSAGE NUMBER, THEN PLAY THE RECORDED MESSAGE
4. PRESS THE HOME BUTTON TO ADVANCE TO THE NEXT MESSAGE TO BE PLAYED
5. PRESS AND RELEASE THE CANCEL BUTTON TO EXIT TEST MODE
NOTE: TIME SCHEDULING FOR PLAYING REMINDER
MESSAGES IS SET WITH THE RA-2400 SOFTWARE
ERASING ALL REMINDER MESSAGES 1. PRESS AND RELEASE THE TEST BUTTON TO ENTER TEST MODE
2. PRESS AND HOLD THE HOME BUTTON FOR MORE THAN 10 SECONDS
3. THE CONSOLE WILL ERASE ALL REMINDER MESSAGES
AND PLAYBACK SCHEDULES 4. PRESS AND RELEASE THE CANCEL BUTTON TO
EXIT TEST MODE
3