Lumex Syatems LF2020, LF2090 Features, Handling Procedures, Unpacking Inspection, Storage

Page 7

FEATURES

1.Base-

2.Mast-

3.Control Box-

4.Pendant-

5.Actuator-

6.Lifting Boom-

7.Kneepad Assembly-

8.Footrest-

9.Brake-

HANDLING PROCEDURES

SHIPPING AND TRANSPORTATION INSTRUCTIONS

If the patient lift is to be reshipped by common carrier, it should be packed in the same carton/s in which it was received.

Unpacking

Inspection

1.Check for any obvious damage to the carton or its contents. If damage is evident, notify the carrier or your authorized Graham-Field Health Products Dealer.

2.Remove all loose packing from the carton.

3.Carefully remove all the components from the carton.

Note: Unless the patient lift is to be used immediately, retain boxes, containers and packing material for use in storing until use of patient lift is required.

1.Examine the exterior of the patient lift for nicks, dents, scratches or other damage.

2.Inspect all components.

Storage

1.Store the repackaged patient lift in a dry area.

2.DO NOT place other objects on top of the repackaged patient lift.

LF2020/LF2090 Sit-To-Stand Patient Lift Owner’s Manual

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SIT-TO-STAND Patient Lift Page Contents Special Notes IntroductionSafety Precautions MaintenancePage Storage FeaturesHandling Procedures Unpacking InspectionAssembly Instructions Preparation Before Lifting Operating InstructionsFitting Lumex Sit-to-Stand Sling Lift and Transfer From Bed Lift and Transfer From Chair Important Notes on Charging Know What The Battery Indicator Lights Are Telling YouChecking the Batteries Charging the BatteriesCare and Maintenance Maintenance Schedule Symptom Possible Cause Action TroubleshootingSpecifications Limited to Such REPAIR, Replacement Limited WarrantyFitness for a Particular PURPOSE, Page A., Corporate Headquarters
Top Page Image Contents