Scrolling
Keep one side of the memory button pressed for scrolling through the memory.
Press the on/off button (B) to exit the memory mode.
Select mode
Setting date and time
First turn off the appliance. Push the select button (C) for longer than 3 seconds to enter the select mode. Wait for a confirmation beep. The day position of the displayed date starts flashing. Using the memory button (D), you can adjust the date. Press the select button again to make the month position flash, adjust it using the memory button. Press the select button again and proceed the same way to adjust the time (hour/minute).
After having changed date and time, press the on/off button (B) to confirm. The device will then turn off.
Deactivating the positioning system
Should you wish to deactivate the positioning system (e.g. because you want to measure while lying down), proceed as follows:
Turn off the product. Push the select button (C) for longer than 3 seconds and wait for the confirmation beep. The display shows the date and time settings. Then repeatedly press the select button until the positioning system symbol ( 
) will be displayed next to a flashing «ON».
Press one side of the memory button to change the setting from
«ON» (positioning system activated) to «OFF» (positioning system deactivated).
To confirm the change of setting, press the on/off button
(B).
Please note:
Unless you confirm a modified setting by pressing the on/off button, the appliance will turn off automatically after 2 minutes without adapting the modified setting.
9