Braun VL955 manual Lift Passengers

Page 19

Pre-Lift Operation Notes and Details

Switches section). Discontinue lift operation immediately if the handrails do not operate properly.

Lift Passengers

Do not attempt to load or unload a passenger in a wheelchair or other apparatus that does not fit on the platform area. Do not exceed the 800 pound load capacity of the lift.

Passenger Orientation (Board- ing Direction): The wheelchair passenger must face outward whenever on the platform.

The passenger must be posi- tioned in the center of the platform to prevent side-to-side load imbalance. Other persons

should not ride on the platform with the wheelchair passenger. The wheelchair brakes must be locked and the roll stop must be in the fully-up(vertical) position whenever a wheelchair passen- ger is on the platform.

Do not use the outboard roll stop as a barrier (brake). Stop and brake the wheelchair when fully loaded on the platform. Manually stop and brake manual wheel- chairs. Stop powered wheelchairs with the wheelchair controls. Turn powered (electric) wheelchairs off when on the platform.

Vehicle (Floor Level) Loading and Unloading: The platform must be fully raised (at floor level) and the bridge plate must be properly positioned when

loading or unloading a passenger in or out of the vehicle. Although the VL955 features automatic floor level switching, it is the responsibility of the lift opera- tor to ensure the platform and the bridge plate are properly positioned at floor level when loading and unloading passen- gers.

If the roll stop, bridge plate, handrails or any other lift compo- nent does not operate as outlined in this manual, discontinue lift use immediately and contact your sales representative or call The Braun Corporation at 1-800- THE LIFT. One of our national Product Support representatives will direct you to an authorized service technician who will inspect your lift.

Page 17

Image 19
Contents Operators Manual for Congratulations Contents Rear Lift TerminologyLift Components IntroductionLift Terminology Rotates downward from vertical position to ramp position Safety Symbols Safety FIRST! Know That Lift Operation SafetyLift Operation Safety Precautions Lift Operation Safety Lift Operation Safety Replace missing, worn or illegible decals Lift Pre-Lift Operation Notes and DetailsPump Module Control Switches The lift-mounted Control SwitchesBraun Corporation After- market Control Systems Policy DownLift Features Fully-Folded Roll Stop Up-vertical Pre-Lift Operation Notes and Details Lift Passengers Wheelchair-Equipped Occupant Seat Belts Operation Procedure ReviewPreventive Maintenance Pre-Lift Operation Notes and Details Lift Operating Instructions To Open Doors To Unload Passenger Unlock wheelchair brakes and unload passenger from platform To Load Passenger To Fold Platform To Close Doors Manual Operating Instructions Follow all Lift Operation Safety PrecautionsTo Lower Platform Down To Unfold Roll Stop To Unfold Platform OutTo Raise Platform To Fold Roll StopTo Fold Platform Lift is only as safe as Decals and AntiskidAvailable Antiskid AntiskidMaintenance and Lubrication Maintenance and Lubrication Series No Pump Code Model No Serial No Warranty and Registration InstructionsWarranty and Registration Instructions Providing Access to the World Vista Series