Braun VL955 manual To Load Passenger

M

O

UP

Lift Operating Instructions

To Load Passenger:

1. Load passenger onto platform facing outward and lock wheel- chair brakes.

Note: Roll stops must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L.

2.Press red UP switch until platform stops (reaches floor level). Re- lease switch.

Handrail Switch: Slide knob out to UP position.

Note: Roll stop must be UP before raising platform. Platform will raise above ground level approximately two inches before the roll stop reaches the fully UP position.

N

approximately 2"

P

Page 25