Flex Integral 6520 | Flex Integral 6515 |
Flex Integral 6510
Our products are designed to meet the highest
standards of quality, functionality and design. English We hope you entirely enjoy your new Braun
shaver.
Caution
•Do not use the shaver near, or over, basins filled with water (e. g. bath tubs, showers etc.).
•For safety reasons, periodically check the cord for damage and replace it, if it is loose in the shaver socket.
1 Description
1Foil protection cap
2 Triple shaving frame
3 Duo cutter block
4 Release button
5 Long hair trimmer
6 Switch
7 Switch lock
8
9 Charging light (green) j Shaver socket
2Charging the shaver
•When charging the shaver for the first time, connect it to the mains and charge it for at least
4hours (switch position «0»).
Then shave without the cord until the red low- charge light starts flashing.
(Modell 6510: Shave without the courd until the shaver runs distinctly slower.)
•Subsequent charges will take approximately
1hour.
•Wattage: 6 Watts
Voltage range during charging: 12 - 240 V Q /
50or 60 Hz (automatic adaption).
Best environmental temperature range for charging: 15 °C to 35 °C
2 | 3 |