28ENGLISH
C 3 | Discard any remaining cleaning solution in |
| the canister. |
The cleaning solution can be safely poured down | |
the sink as there are no harmful ingredients. | |
C 4 | Simply rinse the canister with warm water. |
| Wipe the canister with a towel or tissue |
| to remove excess water. |
C 5 | Carefully lower the Jet Clean System over |
| the canister making sure the release |
| buttons snap back into position. |
Maintenance
◗Always remove razor from the Jet Clean System before cleaning appliance.
◗Unplug the Jet Clean System.The Jet Clean System may be wiped clean using a damp cloth.
◗Water from the tap should be on a warm setting to clean all washable parts.
Note; DO NOT place or clean any parts of the
Jet Clean System in a dishwasher.
ENGLISH 29
Storage
C ◗ The razor can be placed in the Jet Clean System for safe storage. If storing razor in Jet Clean System, remove the plug from outlet as soon as the razor is fully charged or cleaned.
◗If appliance will not be used for an extended period of time, it is recommended that the cleaning solution in the canister be emptied out before storing.
◗Be sure razor is turned off. Remove cord from outlet and razor or Jet Clean System before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.
◗Do not wrap cord around razor or Jet Clean System when storing.
◗Store cord in a safe location where it will not be cut or damaged.
◗Do not keep razor or Jet Clean System permanently plugged into outlet.
◗Do not place or store razor or Jet Clean System where it can fall or be pulled into a tub or sink, water or other liquid while
plugged in.
C ◗ If storing razor outside the Jet Clean System, put the Protective Razor Head Cap on razor to protect heads.