Philips 8160XLCC manual Charging Razor with a Cord, Charging Razor with Jet Clean System

Page 8

14ENGLISH

Charging Razor with a Cord

C 1 Connect cord directly to razor and connect the charging plug into any 100V to 240V AC outlet. Use only the charging plug provided.

An adaptor plug may be necessary for charging plug usage in some foreign countries.

Use an attachment plug adaptor of the proper configuration for the power outlet.

The charging plug will automatically convert to work on 100V to 240V AC systems.

C As you charge razor, the bottom light on the display blinks red.After a few minutes, it will turn green and blink.As charging continues, more and more lights of the display meter will briefly blink green and light up to indicate what level of the batteries have been charged.

2 First time charging and recharging after

non-use for 1 month or more requires a full

4 hours. After initial charge, recharging

requires 1hour. A fully charged razor has a

cordless shaving time of up to 17 days.

When batteries are fully charged, all the ‘lights’

in the display will light up green. A few hours

ENGLISH 15

Charging Razor with Jet Clean

System

C 1

Connect the small plug to the Jet Clean

 

System. Connect the charging plug into any

 

100V to 240VAC outlet. Use only the

 

charging plug provided.

The razor holder automatically moves up to the

highest position.

C 2

Remove protective razor head cap from

 

razor.

C 3

Place the razor head side down in the razor

 

holder so that the razor head fits into the

 

configuration shown inside the Jet Clean

 

System. Gently press the base of the razor

 

towards the back of the Jet Clean System

 

so that the razor base fits snugly in place.

 

Lock the razor into place by pushing the

 

lever down completely.The lever will not

 

lock down unless the razor has been

 

properly placed in the holder. Do not force

 

lever.

after charging, all lights go out.

Do not leave the razor continuously plugged

into outlet as it would reduce the life of the

batteries. Remove plug from outlet as soon as

razor is fully charged.

C

The charging light blinks to indicate the razor is being automatically (re)charged and will light up continuously when fully charged.

Image 8
Contents With Jet Clean System 8160XLCC Save These Instructions Table of Contents Features Jet Clean System Razor Lever ON/OFFLED Battery Level Indicators Charging IndicatorFull Charge Indicator Before First UseCharging Razor with Jet Clean System Charging Razor with a CordRecharging Quick ChargePut It To The Test & Shaving Tips System, the charging light will turn offCleaning TrimmingPreparing Jet Clean System For Use Place the Jet Clean System on a flat,level surfaceCanister up to the MAX indication Located inside the canisterJet Cleaning the Razor Recharging Quick Cleaning Razor HeadsBlink indicating that the razor is Cleaning the Jet Clean Canister After Each Use TrimmerMaintenance StorageAssistance AccessoriesReplacement Heads