18ENGLISH
10Close the Razor Head Assembly.
Once A Month: Razor Heads
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. rubbing alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.
After Each Use: Trimmer
1Turn razor OFF.
2 Push down
C3 Clean trimmer with the brush every time you use it.
C 4 | Lubricate the trimmer teeth with one |
| drop of mineral oil every 6 months. |
5 | Close trimmer by pressing trimmer down. |
This razor has no other | |
For assistance call | |
ENGLISH 19
Replacing the Razor Heads
◗Replace the razor heads once a year for optimal shaving results.
◗Replace damaged or worn razor heads with model HQ8 Philips Norelco razor heads only.
Storage
| ◗ Be sure razor is turned off. Remove cord from |
| outlet and razor before storing in a safe, dry |
| location where it will not be crushed, banged, |
| or subject to damage. |
| ◗ Do not wrap cord around razor when storing. |
| ◗ Store cord in a safe location where it will not |
| be cut or damaged. |
| ◗ Do not keep razor permanently plugged into |
| outlet. |
| ◗ Do not place or store razor where it can fall |
| or be pulled into a tub or sink, water or other |
C | liquid while plugged in. |
◗ Put the Protective Razor Head Cap on razor | |
| to protect heads. |