12ENGLISH
C 3 | Remove the metal clip by means of a |
| screwdriver. |
C 4 | Open the housing. |
C 5 Pull the battery holder out of the appliance.
C |
| Insert a screwdriver into the small slot in |
6 | ||
|
| the printed circuit board marked with an |
|
| arrow. Push the screwdriver down until |
|
| part of the printed circuit board breaks |
|
| off. |
C |
| Separate the battery from the plastic part |
7 | ||
|
| by means of a screwdriver. |
8 Dispose of the battery and the other components in an environmentally safe way.
Do not connect the appliance to the mains again after it has been opened!