ENGLISH 5
Corded clipping
◗To clip with the hair clipper connected to the mains:
Switch the hair clipper off, connect it to the mains and wait a few seconds before switching it back on. If the battery is completely empty: wait a few minutes before switching the appliance on.
Do not run the appliance from the mains when the battery is fully charged.
C
C
2
1
Preparing for clipping
Clipping with comb attachment:
1Slide the arms and the adjustment button of the comb attachment into the guiding grooves of the appliance.
2Press the adjustment button on the back of the appliance and slide the comb attachment to the desired position (see table).
3Release the adjustment button to lock the comb.
4Switch the appliance on.
If a lot of hair has accumulated in the comb, remove the comb attachment and blow and/or shake the hair out of the comb.