8.
9Only brush the cutter in an upward motion. Use the short bristled side of the brush.
10Brush the slots of the razor head. For optimum performance, razor cutters and heads should be cleaned in a degreasing liquid (e.g.Norelco Razor Cleaner model RC1776 or alcohol) and lubricated with Norelco Razor Lubricant,model AL80,or one drop of mineral oil (in the center of the head).
11Replace the cutter and razor head in the Head Assembly.
12Repeat the process for the other two razor heads (cutters and heads).
13Replace the frame.
14Press down and turn the wheel clockwise until it locks into place.
15Replace the Razor Head Assembly back on razor.