Philips 5616X manual Inserting Lotion Cartridge, Replacing Used Cartridge

Page 10

5.

Inserting

Lotion

Cartridge

4

3

FIRST USE

1Take one cartridge from the box.

2Remove the supplied connector out of the little bag. Push it into the plastic cap of cartridge until you hear it “click” into place (Fig. 3).

3Slide the back cover of razor down to remove from razor (Fig. 4).

4Slide the cartridge, with the connector in place, into position in razor. The connector should slide into the recess area with hole located at the top of razor. The white round dot on the connector must face down towards the razor (Fig. 5).

5Replace back cover on razor and press it down into position until it snaps shut.

Replacing

Used

Cartridge

5

1Slide back cover off razor.

2Remove the empty cartridge from the cover and pull out the connector. DO NOT discard the connector.

3Rinse out the cartridge compartment with hot water before replacing cartridge.

Air dry thoroughly.

4Insert the connector into the new cartridge. Push connector into the plastic cap of cartridge until you hear it “click” into position.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructions for use Important Safeguards Product Assistance Razor Information Invest two weeks for the shave of a lifetimeBattery Disposal Information When discarding your razorDAY MONEY-BACK Guarantee Features Do not use with Direct Current DC To ReCharge Charging base and will recharge continuouslyReplacing Used Cartridge Inserting Lotion CartridgeTake one cartridge from the box Shaving Remove Protective Razor Head Cap. Turn razor onTo Use Trimmer Click-On TrimmerTo Connect Trimmer To Remove TrimmerSwitch Razor OFF Maintenance InstructionsTo Clean Trimmer Shake off excess water and close Razor Head AssemblyWhen Replacing Cartridge When Replacing Cartridge or Once Every MonthCharging Base & Pouch Damp clothHeads ReplacementAccessories RazorFull TWO Year Warranty
Top Page Image Contents