10.
14
15 |
16 |
6Cutter should be held with cutters facing up and brushed in an upward motion (Fig. 14). Clean razor comb with long bristles of brush in a circular motion.
7For consistently close and comfortable shaves, razor heads should be cleaned and lubricated every 4 weeks. Clean heads in a degreasing liquid or alcohol.
8While holding Razor Head Assembly in one hand, gently place one cutter/comb back into Assembly (Fig. 15).
9Repeat procedure for other two cutting heads.
10 Replace frame back into Razor Head Assembly. While pressing down, turn wheel clockwise to lock frame into place (Fig. 16).
11 Press Razor Head assembly back on razor housing.
12 Spread Norelco Razor Lubricant, model AL80, or one drop of mineral oil over floating heads with your finger.
Charging Base & Pouch
1The charging base can be placed on countertop. You may clean the charging base using a
damp cloth.
2The pouch stores the razor and two spare cartridges.The pouch can be washed, see washing instructions inside pouch before cleaning.