ENGLISH 7
Preparing the appliance for use
Mounting the appliance to the wall
C 1 Mount the charging unit to the wall, using 2 screws (3.0x30mm) and 2 wall plugs (S5) (not included).
3
1
2
C ◗ To drill the holes in the right places, you can use the drilling stencil on the last page of these directions for use.
Charging the appliance
1Charge the appliance for at least 16 hours before using it for the first time.
C ◗ Make sure the appliance is switched off when you start charging it.
◗ You can put the toothbrush in the stand and let it charge continuously.
However, when you first start using the appliance, it is recommended that you use it until the battery is empty.To do so, use the appliance in the normal way without recharging it between the brushing sessions. Recharge the appliance when the motor almost stops running. Repeat this procedure 3 times in a row.
To extend the lifetime of the battery, repeat this procedure every 6 months.