English 9
Quadpacer®
1
2
4 3
See the “Brushing instructions” and “Personalizing your brushing experience” sections.
The Quadpacer feature on this model has been activated.To deactivate or reactivate the Quadpacer feature:
1Place the handle with a brush head attached in the
2Press and hold the Personalized brushing button until:
AYou hear 1 beep to indicate the Quadpacer has been deactivated. B You hear 2 beeps to indicate the Quadpacer has been activated.
Note:The Quadpacer feature cannot be deactivated on the
Cord wrap on deluxe charger (select models)
If your model includes the deluxe charger cover and base, the travel charger is
1To separate the charger cover from the charger base, press the two gray snap bars on the charger base and pull the white charger cover upwards.
2Wrap excess power cord around the gray charger base as shown in the picture. Be sure to wrap the cord on the inside of the two snap levers.
3When you have stored the excess cord, guide the power cord through the small groove in the rear of the gray charger base.
4Reattach the charger cover by pressing it down over the charger base until it snaps into place.
Tip: For extra convenience during travel, you can remove the travel charger and use it without the charger cover and charger base.
4235.020.2275.6.indd 9