Oregon Scientific RMR232PHU, RMR232PHN Maximum and Minimum Temperatures, Disconnected Signals

Page 7

The unit is in searching mode.

Temperature readings are securely registered.

No signals.

MAXIMUM AND MINIMUM

TEMPERATURES

The maximum and minimum recorded indoor and outdoor temperatures will be automatically stored in memory. To display them, press [ MEM ] once to display the maximum temperature and again the minimum temperature. The respective indicators, [ MAX or MIN ] will be displayed.

To clear the memory, hold down [ MEM ] for two seconds. The maximum and minimum temperatures will be erased. If you press [ MEM ] now, the maximum and minimum temperatures will have the same values as the current ones until different readings are recorded.

DISCONNECTED SIGNALS

If without obvious reasons the display of the outdoor temperature

goes blank, press [ ] and [ ] to enforce an immediate search.

GB

If that fails, check:

1.The remote unit is still in place.

2.The batteries of both the remote unit and main unit. Replace as necessary.

Note: When the temperature falls below freezing point, the batteries of outdoor units will freeze, lowering their voltage supply and the effective range.

3.The transmission is within range and path is clear of obstacles and interference. Shorten the distance when necessary.

TRANSMISSION COLLISION

Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes.

NOTE ON ° C AND ° F

The unit of temperature display can be selected by pressing ° C / ° F button repeatedly.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Introduction Main Features Main UnitTHREE-LINE Display Main Features Remote UnitBattery Installation Remote Unit Battery Installation Main UnitBefore YOU Begin HOW to Insert a Photo LOW Battery WarningHOW to Exchange Front KEY Panel HOW to USE the Table Stand Wall MountingCompatible Photo Sizes Getting Started Reset ButtonHOW to Check Remote and Indoor Temperatures HOW to Read the Kinetic Wave DisplayDisconnected Signals Maximum and Minimum TemperaturesTransmission Collision About Radio Reception Calendar Clock Display ModesHOW to SET and ARM the Alarm HOW to SET the Calendar Clock ManuallyHOW to Stop AN Alarm Specifications PrecautionsArticle 3.1.a of the R&TTE directive Applied standards EC-DECLARATION of Conformity

RMR232PHU, RMR232PHN specifications

The Oregon Scientific RMR232PHN and RMR232PHU are sophisticated weather monitoring devices designed for both home and personal use. These models combine functionality with user-friendly features, making them ideal for weather enthusiasts and those wanting to keep up with local climate conditions.

One of the standout features of the RMR232PHN and RMR232PHU is their ability to provide real-time information on various weather parameters. These devices are equipped with advanced sensors that measure indoor and outdoor temperature, humidity levels, and barometric pressure. Users can easily monitor these conditions on a clear and intuitive display, ensuring they remain informed about their environment.

Both models utilize wireless technology to transmit data from outdoor sensors to the main unit. This feature allows for a seamless monitoring experience without the need for cumbersome wiring. The sensors can be placed at strategic locations around the home or property, ensuring accurate readings from different areas.

Additionally, the RMR232PHN and RMR232PHU come with programmable alerts, which notify users of significant changes in weather conditions. This can be especially beneficial in scenarios where sudden temperature drops or humidity spikes may impact daily activities or planning. The customizable nature of these alerts means users can tailor the notifications to their preferences, enhancing their overall user experience.

Another noteworthy characteristic of the Oregon Scientific RMR devices is their elegant design. They feature a sleek, modern aesthetic that will fit seamlessly into various home decors. The large, easy-to-read display is a significant advantage for users, as it allows for quick glances at the weather data without straining the eyes.

In terms of power, these devices are designed to be energy efficient, typically running on batteries, which empowers users to set them up in locations where electrical outlets may not be accessible.

Overall, the Oregon Scientific RMR232PHN and RMR232PHU represent a blend of style, technology, and practicality. With their comprehensive weather monitoring capabilities and user-centric features, they are excellent choices for anyone interested in keeping track of both indoor and outdoor conditions, ensuring you stay well-informed about the world around you.
Top Page Image Contents