Oregon Scientific RMR232PHN Reset Button, Getting Started, HOW to Read the Kinetic Wave Display

Page 6

GB

THE RESET BUTTON

This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.

GETTING STARTED

Once batteries are in place for the remote unit, they will start transmitting temperature readings at 78-second intervals.

The main unit will also start searching for signals for about four minutes once batteries are installed. Upon successful reception, the outdoor temperature will be displayed on the top line and the indoor temperature on the second line. The main unit will automatically update its readings at about 78-second intervals.

HOW TO CHECK REMOTE AND INDOOR

TEMPERATURES

The indoor temperature is shown on the second line of the display.

The outdoor temperature is shown on the top line of the display. The kinetic wave display on the outdoor temperature indicates if the reception of the remote unit is in good order.

If no readings are received from the remote unit for more than four

minutes, blanks “ ” will be displayed until further readings are successfully searched. Check if the remote unit is sound and secure. You can wait for a little while or press [ ] and [ ] simultaneously to enforce an immediate search.

If the temperature goes above or below than the temperature measuring range of the main unit or the remote unit (stated in specification), the display will show “HHH” or “LLL”.

HOW TO READ THE KINETIC WAVE

DISPLAY

The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms:

If no signals are received, blanks " " will be displayed and the

kinetic wave icon will show “ “. Press [ ] and [ ] simultaneously to enforce another search for about 4 minutes. This is useful in synchronizing the transmission and reception of the remote and main units.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Main Features Main Unit IntroductionMain Features Remote Unit THREE-LINE DisplayBattery Installation Main Unit Battery Installation Remote UnitBefore YOU Begin LOW Battery Warning HOW to Insert a PhotoHOW to USE the Table Stand Wall Mounting HOW to Exchange Front KEY PanelCompatible Photo Sizes HOW to Read the Kinetic Wave Display Reset ButtonHOW to Check Remote and Indoor Temperatures Getting StartedMaximum and Minimum Temperatures Disconnected SignalsTransmission Collision Calendar Clock Display Modes About Radio ReceptionHOW to SET the Calendar Clock Manually HOW to SET and ARM the AlarmHOW to Stop AN Alarm Precautions SpecificationsEC-DECLARATION of Conformity Article 3.1.a of the R&TTE directive Applied standards

RMR232PHU, RMR232PHN specifications

The Oregon Scientific RMR232PHN and RMR232PHU are sophisticated weather monitoring devices designed for both home and personal use. These models combine functionality with user-friendly features, making them ideal for weather enthusiasts and those wanting to keep up with local climate conditions.

One of the standout features of the RMR232PHN and RMR232PHU is their ability to provide real-time information on various weather parameters. These devices are equipped with advanced sensors that measure indoor and outdoor temperature, humidity levels, and barometric pressure. Users can easily monitor these conditions on a clear and intuitive display, ensuring they remain informed about their environment.

Both models utilize wireless technology to transmit data from outdoor sensors to the main unit. This feature allows for a seamless monitoring experience without the need for cumbersome wiring. The sensors can be placed at strategic locations around the home or property, ensuring accurate readings from different areas.

Additionally, the RMR232PHN and RMR232PHU come with programmable alerts, which notify users of significant changes in weather conditions. This can be especially beneficial in scenarios where sudden temperature drops or humidity spikes may impact daily activities or planning. The customizable nature of these alerts means users can tailor the notifications to their preferences, enhancing their overall user experience.

Another noteworthy characteristic of the Oregon Scientific RMR devices is their elegant design. They feature a sleek, modern aesthetic that will fit seamlessly into various home decors. The large, easy-to-read display is a significant advantage for users, as it allows for quick glances at the weather data without straining the eyes.

In terms of power, these devices are designed to be energy efficient, typically running on batteries, which empowers users to set them up in locations where electrical outlets may not be accessible.

Overall, the Oregon Scientific RMR232PHN and RMR232PHU represent a blend of style, technology, and practicality. With their comprehensive weather monitoring capabilities and user-centric features, they are excellent choices for anyone interested in keeping track of both indoor and outdoor conditions, ensuring you stay well-informed about the world around you.
Top Page Image Contents