ENGLISH
NAMESAND FUNCTION | CHANNEL DIRECT CALL | |
You can select the desired channel by directly tapping | ||
| ||
| the numeric keypads on the remote controller. |
BASIC CONNECTIONS | 1. | |
2. | ||
BASIC | 3. | |
4. | ||
OPERATION | ||
| ||
ADVANCED CONNECTIONS | 1. To select tuner, press the TUNE button twice | |
| ||
| within two seconds on the remote controller. | |
| 2. Press the BAND button to select XM band. | |
| 3. Press the F.DIRECT button. | |
| “XM - - | |
| 4. Input the three digit number for your desired | |
SETUP | channel with the numeric keypad on the remote | |
controller. | ||
5. The desired channel will automatically be | ||
| tuned. | |
| Note: | |
| If there is no input on the keypad for 5 sec., the input is | |
ADVANCED OPERATION | cancelled to return to the original display. | |
channel or information. | ||
| Notes: | |
| • “LOADING” is displayed while receiving the | |
| • “CH UNAUTH” is displayed while updating | |
TROUBLESHOOTING | encryption code. | |
• When the selected channel is not available, “CH | ||
| ||
| UNAVL” is dispIayed. | |
| • “OFF AIR” is displayed while air is suspended (e.g. | |
| midnight). | |
OTHERS |
|
PRESET MEMORY
You can store the desired channel in the Preset Memory.
In addition to AM and FM, it is possible to preset 50 XM Satellite Radio channels.
3.2. 4.
2.
3.
(Using the unit)
1. Tune into the desired channel.
2. Press the MEMORY button on the front panel.
”-
-- X M 0 4 0
3.Select the preset number by pressing the 1 or 2 cursor buttons, While this is still blinking (approx. 5 seconds)
0 1 X M 0 4 0
4. Press the MEMORY button again to enter. The display stops blinking.
The channel is now stored in the specified preset memory location.
(Using the remote controller)
1. Tune into the desired channel.
2. Press the MEMO button on the remote controller. “-
3. Enter the desired preset number by pressing the numeric buttons.
Note:
When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.
CHECKING THE XM PRESET CHANNEL
The preset channel can be checked on the on screen display.
1.
3. 
4.
2.
(Using the remote controller)
1. To select tuner, press the TUNE button twice within two seconds on the remote controller.
2. Press the BAND button to select XM band.
3. Press the INFO button. to view a list of tuner preset channeI on the on screen display.
4. If there are 10 or more preset channel, press the INFO button again.
XM PRESET LIST
NO . 1 XM010 XXXXXXXXXX
NO . 2 XM011 XXXXXXXXXX
NO . 3 XM015 XXXXXXXXXX
NO . 4 XM022 XXXXXXXXXX
NO . 5 XM125 XXXXXXXXXX
NO . 6 XM001 Preview
NO . 7 XM001 Preview
NO . 8 XM001 Preview
NO . 9 XM001 Preview
NO . 10 XM001 Preview
Note:
The preset channel indication disappears in about 5 sec.
56
