Marantz SR6003 manual English, Advanced, Operation, Notes, Others

8. Repeat steps 7 until measuring 6 points between the main listening position and surrounding positions.

When all measurements end, the following GUI appears on the display.

Audyssey MultEQ Setup

Speaker Check : OK

Calculate

: : Enter : OK Exit : Exit

Select “Calculate” with the 3/4 cursor buttons and press the ENTER button to calculate measurement results. During calculations, the following GUI appears on the display.

Audyssey MultEQ Setup

--------------

Now Calculating!

: : Enter : Exit :

Note:

•Fewer than 6 positions may be measured, but it is recommended to measure in all 6 positions for best results. Measuring in just one position is not recommended as it does not provide enough acoustical information to the MultEQ algorithm.

•The time needed to complete calculations depends on the number of connected speakers and measured listening positions. The more speakers and listening positions, the more time is needed.

9. Checking Measurement Results

When calculations for the measurement results end, a screen appears for confirming the calculation results.

Check Result

Speakers Config

Speakers Size

Speakers Distance

Channel Level

Crossover Frequency

Store

: Up / Down : Enter : Select Exit : Exit

Select items to check with the 3/4 cursor buttons and press the ENTER button to enter them.

Note:

To check equalizer (MultEQ) parameters, see page 40.

[Example] Confirmation screen for speaker detection

	Speakers Config
	Check Speaker Results
	Front Left	: Yes
	Center	: No
	Front Right	: Yes
	Surround Right	: Yes
	Surround Back Right	: No
	Surround Back Left	: No
	Surround Left	: Yes
	Subwoofer	: Yes
	Return
:	:	Enter : Return Exit : Exit

[Example] Confirmation screen for speaker size.

	Speakers Size
	Front Left	: Auto
	Center	: Auto
	Front Right	: Auto
	Surround Right	: Auto
	Surround Back Right	: Auto
	Surround Back Left	: Auto
	Surround Left	: Auto
	Return
:	:	Enter : Return Exit : Exit

[Example] Confirmation screen for the distance from speakers to the listening position

Speakers Distance
Unit		: Feet
Front Left		: 30.0 ft
Center		: 19.3 ft
Front Right		: 29.6 ft
Surround Right		: 21.5 ft
Surround Back Right		: 12.3 ft
Surround Back Left		: 11.6 ft
Surround Left		: 16.3 ft
Subwoofer		: 12.5 ft
Return
: Up / Down	:	Enter : Return Exit : Exit

*The units can be changed by moving the cursor to Meters of Unit and pressing 1 / 2 the cursor buttons. Each time a 1 / 2 cursor button is pressed, the units alternate between Feet and Meters.

Note:

This system cannot measure a distance of 9.15 m (30.0 ft) or higher. In this case, >9.15 m (>30.0 ft) is displayed.

[Example] Confirmation screen for channel level.

	Channel Level
	Front Left	:	0.0dB
	Center	:	-6.5dB
	Front Right	:	-1.5dB
	Surround Right	:	+1.0dB
	Surround Back Right	:	+9.5dB
	Surround Back Left	: +12.0dB
	Surround Left	:	-2.5dB
	Subwoofer	: -12.5dB
	Return
:	:		Enter : Return Exit : Exit

[Example] Confirmation screen for crossover frequency.

Crossover Frequency
Front	: Auto
Center	: Auto
Surround	: Auto
Surround Back	: Auto
Return

: : Enter : Return Exit : Exit

*Auto is displayed to indicate that the speaker size and crossover frequency results were automatically measured.

		ENGLISH
10. Storing Measurement Results in Memory				NAMESAND	FUNCTION
Once finished confirming the measurement
results, select “Return” with the 3/4 cursor
buttons and press the ENTER button to display
the Check Result screen.
Check Result				BASIC	CONNECTIONS
Speakers Config
Speakers Size
Speakers Distance
Channel Level
Crossover Frequency
Store
: Up / Down	:	Enter : OK	Exit : Exit	OPERATION
Place the cursor on “Store” and press				BASIC
the ENTER button to store all parameters
including the equalizer parameters in memory.
If not wanting to store the calculation results in				ADVANCED	CONNECTIONS
memory, press the Exit button.
Note:
Pressing “Exit” prior to pressing “Store” erases all
measurement results and calculation results, therefore
operate the remote controller with care.
When storing operations end, the following GUI
appears on the display.				SETUP
Speaker Setup
Auto Setup
Manual Setup
Return
				ADVANCED	OPERATION
: Up / Down	:	Enter : Select	Exit : Exit	TROUBLESHOOTING
Notes:
• Do not turn the power to the unit off while storing
parameters in memory. This may erase all data in the
unit’s memory and may damage the unit.
				OTHERS

31