SELECTING THE SURROUND MODE
Example: AUTO SURROUND
(Using the unit)
To select the Auto surround mode during playback, press the AUTO button on the front panel.
(Using the remote controller)
To select the Auto surround mode, press the AMP button and press the AUTO button.
•For surround modes, see “Surround Mode” on page 78.
DIALOGUE NORMALIZATION MESSAGE
Dialogue Normalization (Dial Norm) is a feature of Dolby Digital.
When playing back software which has been encoded in Dolby Digital, sometimes you may see a brief message on the FL display which will read
Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. For example, if you see the following message:
If you do not see a message on the FL display, then no adjustment of the volume control is necessary.
NIGHT MODE
Useful at night or when loud noise is undesirable, this mode compresses the dynamic range, making it easier to hear quieter audio content without increasing the overall volume.
Note that the effect of night mode is determined by the Dolby Digital content. Night mode may have no effect with content that does not support this function.
1. To select this mode, press the AMP button on the remote controller.
2. Each time the NIGHT button is pressed, the mode changes according to the following options indicated on the front of the unit.
• AUTO Mode
N I G H T A U T O
AUTO mode is available when decording Dolby TrueHD signals.
When night mode is activated, “NIGHT” is illuminated on the front of the unit. (See page 6)
↓
•NIGHT Mode ON
N I G H T O N
Setting the Night mode to “ON” compresses the dynamic range in Dolby Digital only.
↓
• NIGHT Mode OFF
N I G H T O F F
Turn off the Night mode.
LISTENING THROUGH HEADPHONES
This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug.
Note that the speakers will automatically be turned off when the headphone jack is in use.
Note:
•When using headphones, the surround mode will change to STEREO and Dolby Headphone by MENU and Cursor button.
•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.
|
| ENGLISH |
|
| |
DOLBY HEADPHONE MODE | NAMESAND | FUNCTION | |||
This feature simulates the waveforms of the actual | |||||
|
| ||||
sounds heard from the speakers. |
|
| |||
When headphones are used, the MENU button |
|
| |||
automatically switches to the Dolby headphone |
|
| |||
mode. |
|
|
|
| |
The OSD that appears when the MENU button is | BASIC | CONNECTIONS | |||
pressed is shown below. | |||||
|
| ||||
| HEAD | PHONE |
|
| |
DOLBY HP | MODE :DH |
|
| ||
SURROUND | :PL I MV |
|
| ||
L | LEVEL | :+10 . 0dB |
|
| |
R | LEVEL | : 0 . 0dB |
|
| |
with the left and right cursor buttons. | OPERATION | |
BASIC | ||
DOLBY HP (Headphone) MODE can be selected |
| |
BYPASS → DH (DOLBY Headphone) → BYPASS | ADVANCED CONNECTIONS | |
BYPASS: Bypasses the Dolby headphone mode | ||
| ||
and delivers ordinary |
| |
DH: Dolby Headphone is a signal processing |
| |
system that delivers a sound similar to |
| |
room speakers. |
| |
It makes it possible to experience the |
| |
volume and space of a |
| |
surround system using ordinary stereo | SETUP | |
When the PURE DIRECT mode is selected, Dolby | ||
headphones. |
| |
surround processing is bypassed and “✽✽✽” is |
| |
displayed as the mode indication. |
| |
The surround mode can be selected when the |
| |
modes in DH is selected. | ADVANCED OPERATION | |
• The surround mode returns to the previous setting as | ||
L/R LEVEL can be set in the ±12 dB range. |
| |
Notes: |
| |
soon as the plug is removed from the jack. |
| |
• In headphone mode, Tone Control and ACOUSTIC | TROUBLESHOOTING | |
EQ are not available. | ||
| ||
| OTHERS |
43
