PRESET SCAN
1.
5.
2. 3. 
6.
CLEARING STORED PRESET CHANNELS
You can remove preset channels from the memory using the following procedure.
2. 3.
2.
ENGLISH
NAMES AND | FUNCTION |
BASIC | CONNECTIONS |
BASIC OPERATION | |
1. Press the TUNE button twice within two seconds on the remote controller.
2. Press the BAND button to select XM band.
3. Press the P.SCAN button on the remote controller.
4. Preset channels are recalled in sequence (No.1
→ No.2 → etc.) for about 10 seconds each.The time changes by the received condition. No stored preset number will be skipped.
5.Pressing the 2 button during prescanning speeds up scanning.
Also, pressing the 1 button returns to the previous preset channel.
6.When the desired preset channel is received, cancel the preset scan operation by press the P. SCAN button.
3.
1. Recall the preset number to be cleared with the method described in “PRESET SEARCH MODE”.
2. Press the MEMORY button on the front panel or press the MEMO button on the remote controller.
3. The stored preset number blinks in the display for 5 seconds.WhiIe blinking, press the CLEAR button on the front panel or CL button on the remote controller.
4. “xx CLEAR” appears on the dispIay to indicate that the specified preset number has been cleared.
Notes:
•To clear all stored preset channel, press and hold the
•There are 50 preset channels prepared at the factory default. The 50 channels are all set to “CHANNEL 001”. Each channel can be stored in the preset memory. You can search for only the preset channels.
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
57
