Marantz SR6003 English, 5-1ZONE SETUP, 5-2DC TRIGGER SETUP, Names And, Function, Basic, Advanced

5-1 ZONE SETUP

The SR6003 has source selectors, sleep timers, zonespeaker output, and remote controller for the two other ZONEs in the ZONE system.

These features can be set from this menu.

1. Select “Preference” from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “Zone A Setup” or “Zone B Setup” with

the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the setting.

The following explanation shows how to operate ZONE A of the ZONE system.

Zone A Setup
Audio Source		: DVD
Sleep Timer		: Off
Stereo / Mono.		: Stereo
Zone Pre Out		: Off
Volume Mode		: Variable
Level		: -90dB
Zone Speaker Out		: * * *
Volume Mode		: * * *
Level		: * * *
Return
: Up / Down	: Change	Enter :	Exit : Exit

The following explanation shows how to operate ZONE B of the ZONE system.

Zone B Setup
Audio Source	: DVD(Dig.2)
Sleep Timer	: Off
Zone Digital Out	: Off
Return

: Up / Down : Change Enter : Exit : Exit

4. Select the desired item with the 3 or 4 cursor button.

Audio Source:

Select the audio source of the ZONE output with the 1 or 2 cursor buttons.

Sleep Timer:

The sleep mode is available when the ZONE is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 120 minutes in 10 minute increments.

Stereo / Mono: (Zone A only)

This mode switches audio output to the ZONE system between Monaural and Stereo, using the 1 and 2 cursor buttons.

Zone Pre Out: (Zone A only)

Switch the zone pre out “On” or “Off” with the 1 or 2 cursor buttons.

Volume Mode: (Zone A only)

Select whether the zone pre out level is Variable or Fixed with the 1 or 2 cursor buttons.

Level (Volume Level): (Zone A only)

Adjust the zone pre out level with the 1 or 2 cursor buttons. The volume can be set between

-90 dB and 0 dB in 1 dB increments.

Zone Speaker Out: (Zone A only)

Switch the zone speaker out “On” or “Off” with the 1 or 2 cursor buttons.

Volume Mode: (Zone A only)

Select whether the zone speaker out level is Variable or Fixed with the 1 or 2 cursor buttons.

Level (Volume Level): (Zone A only)

Adjust the zone speaker out level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments.

Zone Digital Out: (Zone B only)

Switch the zone digital out “On” or “Off” with the 1 or 2 cursor buttons.

Note:

•Zone Speaker Out setting can be changed when the Surround Back is set to “None” in the Speaker Size menu and “SPEAKER C” is in the OFF position on the rear panel. When this setting is unavailable, “***” is displayed.

•If “Volume” is set to “Fixed”, the ZONE output level cannot be adjusted from the ZONE A.

•Zone Speaker Out cannot be on the ZONE B.

•Functions other than ones that are set to either DIGITAL IN 1-5 or F cannot be selected in ZONE B. There are no MONO/ST, VOL, LEV or SPKR settings for ZONE B.

•If Optical Output is set to Rec (See page 38), Zone B functions cannot be used.

5-2 DC TRIGGER SETUP

This unit has a DC trigger control jack, which can be used to link with input functions for the main ZONE or ZONE A or ZONE B.

1. Select “Preference” from Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “DC Trigger Setup” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the selection.

DC Trigger Setup
TriggerSystem Error!!		: Disable
TV		: * * *
DVD		: * * *
VCR		: * * *
DSS		: * * *
AUX1		: * * *
TAPE		: * * *
CD/R		: * * *
7.1ch Input / AUX2		: * * *
Tuner		: * * *
USB Audio		: * * *
Return
: Up / Down	: Change	Enter :	Exit : Exit

4. You can select “Main Zone”, “Zone A”, “Zone B”, “Remote” or “Disable” with the 1 or 2 cursor buttons.

Note:

•Remote is available for the external control. The RC003SR cannot operate the function.

5.Select desired input source with the 3 or 4 cursor buttons.

6.Set to “On” or “Off” with the 1 or 2 cursor buttons.

7.After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor button and press the ENTER button.

Note:

•When an input source that is on in the set ZONE is selected, voltage is output to the DC TRIGGER output terminal.

ENGLISH

NAMES AND	FUNCTION
BASIC	CONNECTIONS
BASIC OPERATION
ADVANCED	CONNECTIONS
SETUP
ADVANCED	OPERATION
TROUBLESHOOTING
OTHERS

39