2-2 MANUAL SETUP

2-2 MANUAL SETUP

1. Select “Speaker Setup” from the Main Menu.

2. Select “Manual Setup” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the selection.

Manual Setup

Speakers Size

Speakers Distance

Speakers Level

Return

: Up / Down

:

Enter : Select Exit : Exit

4. Select the sub-menu with the 3 or 4 cursor button, and press the ENTER button.

<SPEAKER SIZE>

5. Select Speaker Size with the 3 or 4 cursor button from the Manual Setup menu, and press the ENTER button.

Speakers Size

 

 

 

Subwoofer

 

: Yes

 

Front

 

: Small

 

Center

 

: Small

 

Surround

 

: Small

 

Surround Back

 

: 2ch

 

Surround Back Size

: Small

 

LPF / HPF

 

: 80Hz

 

Bass Mix

 

: * * *

 

Return

 

 

 

: Up / Down

: Change

Enter :

Exit : Exit

When setting the speaker size in the Speaker Size menu, use the guidelines below.

Large:

The complete frequency range for the channel you are setting will be output from the speaker.

Small:

Frequencies of the channel you are setting that are lower than approx. 80 Hz will be output from the subwoofer.

If the Subwoofer is set to “No” and the front speakers are set to “Large,” then the sound will be output from both the left and right speakers.

6. Select each speaker with the 3 or 4 cursor buttons.

7. Set the size of each speaker with the 1 or 2 cursor buttons.

Subwoofer

Yes:

Select when a subwoofer is connected.

No:

Select when a subwoofer is not connected.

Front

Large:

Select if the front speakers are large.

Small:

Select if the front speakers are small.

If “No” is selected for the subwoofer setting, then this setting is fixed at “Large”.

Center

None:

Select if no center speaker is connected.

Large:

Select if the center speaker is large.

Small:

Select if the center speaker is small.

Surround

None:

Select if no surround left and right speakers are connected.

Large:

Select if the surround left and right speakers are large.

Small:

Select if the surround left and right speakers are small.

Surround Back

None:

Select if no surround back left and right speakers are connected.

1ch:

Select if one surround back speaker is connected. In this case, the audio signal is emitted from the SURR BACK LEFT SPEAKER terminal.

2ch:

Select if the surround back left and right speakers are connected.

Zone SPKR:

Select if using the SURROUND BACK SPEAKER terminal as ZONE SPEAKER A.

Notes:

If “No” is selected for the Surround setting, then this setting is fixed to “No.”

Surround Back Size

Large:

Select if the surround back speakers are large.

Small:

Select if the surround back speakers are small.

Note:

If “None” is selected for the Surround setting, then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the cutoff frequency for the small speakers used. Select one of the crossover frequency levels according to the size of the small speakers connected.

60Hz 80Hz 100Hz 120Hz 140Hz 160Hz 180Hz

Note:

If using small front speakers, set a slightly higher frequency. If using large front speakers, set a slightly lower frequency.

Bass Mix

The bass mix setting is only valid when “Large” is set for the front speakers and “Yes” is set for the subwoofer during stereo playback.

This setting has effect only during playback of PCM or analog stereo sources.

When “Both” is selected, the low frequencies will be played through the main L&R speakers and the subwoofer.

In this playback mode, the low frequency range expands more uniformly throughout the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range.

By selecting “Mix”, the low frequencies will play through the main L&R only.

Note:

LFE signals during playback of Dolby Digital or DTS will be played through the subwoofer.

8.After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button to display the Manual Setup screen.

ENGLISH

<SPEAKER DISTANCE>

9. Select Speaker Distance with the 3 or 4 cursor button from the Manual Setup menu, and press the ENTER button.

Speakers Distance

 

 

Unit

 

: Feet

 

Front Left

 

: 10.0 ft

 

Center

 

: 10.0 ft

 

Front Right

 

: 10.0 ft

 

Surround Right

: 10.0 ft

 

Surround Back Right

: 10.0 ft

 

Surround Back Left

: 10.0 ft

 

Surround Left

 

: 10.0 ft

 

Subwoofer

 

: 10.0 ft

 

Return

 

 

 

: Up / Down

: Change

Enter :

Exit : Exit

Use this menu to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.

Begin by determining the ideal or most commonly used seating position in the room.

This is important for the timing of the acoustics to create the proper sound space that the unit and today’s sound systems are able to produce.

Note:

For speakers for which you have selected “None”, the speaker configuration sub-menu will not appear here.

10. Select either Meters or Feet for Unit with the 1

or 2 cursor buttons.

11. Select each speaker with the 3 or 4 cursor buttons.

12. Set the distance for each speaker , press the 1 or 2 cursor buttons.

Front Left:

Set the distance from the front left speaker to your normal listening position.

Center:

Set the distance from the center speaker to your normal listening position.

Front Right:

Set the distance from the front right speaker to your normal listening position.

Surround Left:

Set the distance from the surround left speaker to your normal listening position.

Surround Right:

Set the distance from the surround right speaker to your normal listening position.

NAMES AND

FUNCTION

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

33

Page 36
Image 36
Marantz SR6003 manual English, 2-2MANUAL SETUP, Speaker Size, <Speaker Distance>, Subwoofer, Front, Center, Surround, Notes