Marantz SR6003 manual English, Function, Basic, Advanced, Others

FUNCTION	NAMES AND
CONNECTIONS	BASIC
BASIC OPERATION
CONNECTIONS	ADVANCED
SETUP
OPERATION	ADVANCED
TROUBLESHOOTING
OTHERS

ENGLISH

HDMI

	SYMPTOM				CAUSE		REMEDY
The display		does not		The connected monitor or projector			Be sure to use an HDCP-compatible monitor
appear over		an HDMI		does not support HDCP.			or projector.
connection.				The HDMI input of on the TV is			Set HDMI input so that it turns on, as
				not on.			explained in the TV's instruction manual.
				The HDMI output on the source			Set HDMI output so that it turns on, as
				component (DVD, Set Top Box,			explained in the source component's
				etc.) is not on.			instruction manual.
				The HDMI mode is not correctly			Set HDMI input on the FUNC INPUT
				set on the unit.			SETUP menu as explained on page 27.
				The HDMI output video resolution			Set the resolution so that it matches, as
				of the source component (DVD,			explained in the instruction manuals of both
				Set Top Box, etc.) does not match			components.
				the TV specifications.
				The device is connected with a			A 5 m or shorter cable is recommended to
				non-standard HDMI cable.			ensure stable operation and prevent image
							quality deterioration.
				Power to the unit is off. (When			Turn on the power to the unit.
				the unit is on standby, HDMI
				connections cannot be turned
				on.)
				The	connection	between	Shut off and then turn the power back on to
				HDMI	components	was not	the unit, TV and source component.
				authenticated.
				The HDMI OUT RES setting does			Set the HDMI OUT RES setting to AUTO.
				not match that of the connected			(See page 37)
				TV.
Time is needed for the				The	connection	is being	There is nothing wrong with the system.
display of		an	HDMI	authenticated between the HDMI			Some HDMI devices require time for
connection to appear.				devices.			authentication.
Audio	is not		played	The HDMI audio output of the			Set the HDMI audio output so that it turns
back	over	an	HDMI	source component (DVD, Set Top			on, as explained in the source component's
connection.				Box, etc.) is not on.			instruction manual.
				The signal format of the source			Set the HDMI audio output so that it can
				component (DVD, Set Top Box,			connect to the unit, as explained in the
				etc.) is not supported by the unit.			source component's instruction manual.
				This unit is set to the HDMI audio			In the “THROUGH” mode, sound is not
				“THROUGH” mode.			produced from the unit. Set it to “ENABLE”.
							(see page 38)
DVD-Audio is not played				The DVD player does not support			• Use a DVD-Audio player that supports
back	over	an	HDMI	CPPM, therefore it cannot output			CPPM.
connection.				HDMI audio.			• Turn on PCM downsampling on the DVD
							player.
							• Use an analog connection.

USB

SYMPTOM					CAUSE		REMEDY
Even when the USB				•	The unit cannot recognize the	•	Check whether the USB storage device
storage device is					USB storage device because		and USB cable are fi rmly plugged into the
connected, “NO DEVICE”					of connection trouble or some		unit's USB connector.
remains on the status					other issue.	•	Try removing the USB storage device
display, and the device is							from the unit, and re-connecting it.
not recognized.						•	Try turning the unit’s power off and back
							on, and re-connecting the device.
“UNKNOWN DEVICE”				• A device that cannot be		• Even when a USB storage device
appears	on the	status			recognized by the unit has been		complies with the USB Mass Storage
display when the USB					connected.		Class standard, it may not be possible to
s t o r a g e	d e v i c e		i s				play its fi les using the unit. (This does not
connected.							mean that something is wrong with the
							unit itself.)
				•	The device has been connected	•	USB storage devices cannot be connected
					through a USB hub.		through a USB hub.
“ U N K N O W N		F I L E		•	A format other than FAT16	•	Set the format to FAT16 or FAT32, and
SYSTEM” appears on					or FAT32 is used as the USB		record the files.
the status display when					storage device's format.
a USB storage device is
connected.
" OV E R C U R R E N T "				•	The overcurrent protection	•	No guarantees are made for the operation
appears	on the	status			function of the unit’s USB		of a hard disk drive that is powered from
display when a		USB			connector has been triggered.		the unit's USB connector.
s t o r a g e	d e v i c e		i s				Remove the connected USB storage
connected.							device, and turn the unit's power off and
							back on.
“NO AUDIO FILE” appears				•	No playable files have been	•	Record the supported file on a USB
on the status display when					recorded on a USB storage		storage device.
a USB storage device is					device.
connected.
“CAN'T PLAY” appears on				•	An attempt has been made to	•	The unit cannot play copyright-protected
the status display when					play a copyright-protected file.		files.
a USB storage device is				•	T h e f i l e i s d a m a g e d .	•	Check the file.
connected.					Alternatively, its extension and
					file structure are incompatible.
The fi les recorded on the				•	The USB storage device is	•	If the device is partitioned into a number
USB storage device are					partitioned into a number of		of partitions, displays only for the first
not displayed.					partitions.		partition will appear.
				•	The number of folders exceeds	•	No displays appear for folders after folder
					700 or the number of files		no.700 or for fi les after file no.65535.
					exceeds 65535.

76