Marantz SR6003 manual English, Names And, Function, Basic, Connections, Advanced, Setup, Operation

4 VIDEO SETUP

Video settings are made as follows.

1. Select “Video Setup” from the Main Menu with the 3 or 4 cursor buttons and press the

ENTER button.

Video Setup
Video Convert
TV-Auto		: Disable
OSD Information		: Enable
Component I / P Convert		: Disable
HDMI Output		: Output1
HDMI Output Resolution		: Auto
Return
: Up / Down	:	Enter : Select Exit : Exit

2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button.

• Video Convert

This unit is equipped to convert video signals for monitor output.

This section explains how to set up conversion for each type of video input.

1. Select “Video Setup” from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “Video Convert” with the 3 or 4 cursor buttons and press the ENTER button.

Video Convert
TV		: Analog & HDMI
DVD		: Analog & HDMI
VCR		: Analog & HDMI
DSS		: Analog & HDMI
AUX1		: Analog & HDMI
TAPE		: Analog & HDMI
CD/R		: Analog & HDMI
AUX2		: Analog & HDMI
Return
: Up / Down	: Change	Enter :	Exit : Exit

3. Select “Function” with the 3 or 4 cursor buttons and set the video conversion mode with the 1 or 2 cursor buttons

Analog&HDMI:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). Furthermore, it up-converts from analog video signal to HDMI. (It cannot down- convert from HDMI digital video signals to analog video signals.)

Analog Only:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). It does not up-convert to HDMI.

Off:

This mode turns off all conversion features.

Note:

•For details on video convert feature, see page 46.

•TV-Auto

Select the TV-Auto On/Off function to enable or disable with the 1 or 2 cursor buttons. (refer to page 45)

•OSD Information

Select the OSD information function to “Enable” or “Disable” with the 1 or 2 cursor buttons.

If you select “Enable”, this unit will display the status of the feature (Volume up/down, input select, etc..) on the monitor. If you do not desire this information, select “Disable”.

Note:

•OSD information is not output to Monitor Output of HDMI and Component Video. However, OSD information is output if the Video Convert function is used to output Video or S-Video video signals to Monitor Out of HDMI and Component Video.

For details, refer to“Video Convert”on page 46.

•Component I/P Convert

Set whether or not to convert 480i signals to 480p signals when outputting the analog video input signal input from the VIDEO terminals, S-VIDEO terminals, or COMPONENT terminals.

Select “Enable” or “Disable.” Disable: Do not convert Enable: Convert

Note:

This setting is enabled only when Video Convert is set to other than Off.

•HDMI Output

This setting is for selecting which output terminal,

HDMI 1 or HDMI 2, to output the signal to. Select the output destination with the 1 / 2 cursor buttons.

•HDMI Output Resolution

Selects the resolution of the video signal output

from the HDMI terminal of this unit.

Select from the following using the 1 or 2 cursor buttons.

Auto ↔ Through ↔ 480/576p ↔ 720p ↔ 1080i ↔ 1080p ↔ Auto

ENGLISH

NAMES AND	FUNCTION
BASIC	CONNECTIONS
BASIC OPERATION
ADVANCED	CONNECTIONS
SETUP
ADVANCED	OPERATION
TROUBLESHOOTING
OTHERS

37